2008 Jeep Patriot Owner's Manual - Page 30

28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. All doors are closed. 4. The throttle is pressed. 5. The vehicle speed is above 15 mph (24 km/h). 6. The doors were not previously locked using the power door lock switch or Remote Keyless Entry (RKE) transmitter. The Automatic Door Lock feature can be enabled or disabled. Refer to "Personal Settings" under "Electronic Vehicle Information Center (EVIC) - (if equipped)" in Section 4. For vehicles not equipped with the EVIC, the Automatic Door Locks can be enabled or disabled by performing the following procedure: 1. Close all doors and place the key in the ignition. 2. Cycle the ignition switch between LOCK and ON and back to LOCK four times, ending up in the LOCK position. Ignition Key Position 3. Depress the power door LOCK switch to lock the doors. 4. A single chime will indicate the completion of the programming. 5. Verify reprogramming by driving the vehicle.