2010 Jeep Patriot Owner's Manual - Page 23

22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Test the feature while outside of the vehicle by pressing the LOCK/UNLOCK buttons on the RKE transmitter This feature will cause the turn signal lights to flash when with the ignition switch in the LOCK position and the the doors are locked or unlocked with the RKE transmitkey removed. ter. This feature can be turned on or turned off. To change 4. Repeat these steps if you want to return this feature to the current setting, proceed as follows: its previous setting. • For vehicles equipped with the EVIC, refer to "Electronic Vehicle Information Center (EVIC)/Personal NOTE: Pressing the LOCK button on the RKE transmitSettings (Customer-Programmable Features)" in "Un- ter while you are in the vehicle will activate the Vehicle derstanding Your Instrument Panel" for further infor- Security Alarm. Opening a door with the Vehicle Security Alarm activated will cause the alarm to sound. Press the mation. UNLOCK button to deactivate the Vehicle Security • For vehicles not equipped with the EVIC, perform the Alarm. following steps: Using The Panic Alarm 1. Press and hold the UNLOCK button on a programmed To turn the Panic Alarm feature ON or OFF, press and RKE transmitter for at least 4 seconds, but no longer than hold the PANIC button on the RKE transmitter for at 10 seconds. Then, press and hold the LOCK button while least one second and release. When the Panic Alarm is on, still holding the UNLOCK button. the headlights and park lights will flash, the horn will pulse on and off and the interior lights will turn on. 2. Release both buttons at the same time. Flash Lights With Remote Key Lock/Unlock