2010 Jeep Patriot Owner's Manual - Page 321

320 STARTING AND OPERATING WARNING! (Continued) • The capabilities of an ABS-equipped vehicle must never be exploited in a reckless or dangerous manner which could jeopardize the user's safety or the safety of others. benefits of anti-lock brakes. If the "ABS Warning Light" does not come on when the ignition switch is turned to the ON position, have the bulb repaired as soon as possible. If both the "Brake Warning Light" and the "ABS Warning Light" remain on, the ABS and Electronic Brake Force The "ABS Warning Light" monitors the ABS Distribution (EBD) systems are not functioning. ImmediSystem. The light will come on when the ate repair to the ABS is required. ignition switch is turned to the ON position When the vehicle is driven over 7 mph (11 km/h), you and may stay on for as long as four seconds. may also hear a slight clicking sound as well as some related motor noises. These noises are the system performing its self-check cycle to ensure that the ABS working properly. This self-check occurs each time the vehicle is started and accelerated past 7 mph (11 km/h). If the "ABS Warning Light" remains on or comes on while driving, it indicates that the anti-lock portion of the brake system is not functioning and that service is required. However, the conventional brake system will continue to operate normally if the "Brake Warning Light" is not on. ABS is activated during braking under certain road or stopping conditions. ABS-inducing conditions can inIf the "ABS Warning Light" is on, the brake system clude ice, snow, gravel, bumps, railroad tracks, loose should be serviced as soon as possible to restore the debris, or panic stops.