2010 Jeep Patriot Owner's Manual - Page 359

358 STARTING AND OPERATING graphic display of the pressure value(s) will stop flashing, and the Tire Pressure Monitoring Light will extinguish once the updated tire pressure(s) have been received. The vehicle may need to be driven for up to 20 minutes above 15 mph (25 km/h) to receive this information. Check TPMS Message The Tire Pressure Monitoring Telltale Light will flash on and off for 75 seconds, and remain on solid when a system fault is detected. The system fault will also sound a chime. The EVIC will display a "CHECK TPM SYSTEM" message for three seconds. This text message is Check TPM System Display then followed by a graphic display, with "- -" in place of If the ignition key is cycled, this sequence will repeat, the pressure value(s) indicating which Tire Pressure providing the system fault still exists. If the system fault Monitoring Sensor(s) is not being received. no longer exists, the Tire Pressure Monitoring Telltale Light will no longer flash, the CHECK TPM SYSTEM text message will not be present, and a pressure value