1998 Lincoln Navigator Owner's Manual - Page 162
1998 Lincoln Navigator Manual
Page 162 highlights
Maintenance and care 8. Without turning, carefully pull the bulb assembly out of the headlamp assembly. 9. Insert the glass end of the new bulb into the socket. When the grooves in the plastic base are aligned, push the bulb into the socket until the plastic base contacts the rear of the socket. 10. To complete reinstallation of the headlamp assembly, follow the removal procedures in reverse order. Replacing parking lamp/turn signal bulbs 1. Make sure the headlamp control is in the OFF position. 2. Open the hood. 3. At the back of the headlamp, remove the headlamp assembly retainers by pushing rearward and pulling up. 4. Pull the headlamp assembly forward slightly to expose the electrical connectors. 5. Disconnect the electrical connector from the bulb socket. 6. Rotate the bulb socket counterclockwise about ¼ turn and remove. 7. Without turning, carefully pull out the bulb. 162