1998 Lincoln Navigator Owner's Manual - Page 45
1998 Lincoln Navigator Manual
Page 45 highlights
Controls and features Compass calibration adjustment Perform this adjustment in an open area free from steel structures and high voltage lines. For optimum calibration, turn off all electrical accessories (heater/air conditioning, wipers, etc.) and make sure all vehicle doors are shut. 1. Start the vehicle. 2. Locate the compass module mounted on the base of the mirror. 3. Insert an appropriate diameter rod (paperclip) into the switch access hole underneath the compass module. 4. Gently press the switch for 2 to 4 seconds until CAL and a direction are displayed on the trip computer. (To exit CAL mode before performing a compass adjustment, turn the ignition OFF.) 5. Release pressure from the switch. 6. Slowly drive the vehicle in a circle (less than 5 km/h [3 mph]) until the CAL indicator turns off. This will take up to five circles to complete calibration. 7. The compass is now calibrated. Power quarter rear windows (if equipped) portion of the VENT Press the control to open the power rear quarter windows. portion of the VENT Press the control to close the power rear quarter windows. VENT VENT MODE E/M RESET 45