2001 Mazda Tribute Owner's Manual - Page 202
2001 Mazda Tribute Manual
Page 202 highlights
Maintenance and care 9. Install rubber boot on the lamp assembly. 10. Connect the electrical connector into the rear of the plastic base until it "snaps." Replacing brake/tail/turn/backup lamps bulbs The brake/tail/turn/backup lamp bulbs are located in the tail lamp assembly, one just below the other. Follow the same steps to replace either bulb: 1. Open the liftgate to expose the lamp assemblies. 2. Remove the two screws from the lamp assembly. 3. Carefully remove the lamp assembly by pulling it rearward. 4. Twist the bulb socket counterclockwise and remove from lamp assembly. 5. Pull the bulb straight out of the socket and push in the new bulb. 6. To complete installation, follow the removal procedure in reverse order. Replacing front position lamp bulbs 1. Make sure that the headlamp control is in the OFF position. 2. Open the hood. The position lamps are located on the bottom half of each headlamp. 202