2001 Mazda Tribute Owner's Manual - Page 213
2001 Mazda Tribute Manual
Page 213 highlights
Capacities and specifications Fluid Transfer Case Classification SAE 75W-140 Synthetic Lubricant API service GL-5, SAE 80W-90 Use only ethylene-glycolbased coolant Application Capacity 4X4 (Automatic) 0.35L (12 ounces) 4X4 (Manual) 0.35L (12 ounces) 5.0L (5.3 quarts) Engine coolant 4 Rear axle lubricant Windshield washer fluid 1 SAE 80W-90 Premium Rear Axle Lubricant n/a 2.0L I4 Zetec engine with manual transaxle 3.0L V6 Duratec engine with automatic transaxle 4X4 10.0L (10.6 quarts) 1.4L (2.96 pints) 5 All 2.6L (2.7 quarts) Ensure the correct automatic transmission fluid is used. Transmission fluid requirements are indicated on the dipstick or on the dipstick handle. MERCON and MERCON V are not interchangeable. DO NOT mix MERCON and MERCON V. Refer to your scheduled maintenance section to determine the correct service interval. 2 Service refill capacity is determined by filling the transmission to the bottom of the filler hole with the vehicle on a level surface. 3 Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. 4 Use Premium Engine Coolant (green in color). DO NOT USE Extended Life Engine Coolant (orange in color). Refer to Adding engine coolant, in the Maintenance and Care chapter. 5 Fill to 6 mm to 14 mm (1/4 inch to 9/16 inch) below bottom of fill hole. 213