2002 Mazda B4000 Owner's Manual - Page 262

Maintenance and Specifications BRAKE FLUID Checking and adding brake fluid Brake fluid should be checked and refilled as needed. Refer to the service maintenance section for the service interval schedules. 1. Clean the reservoir cap before removal to prevent dirt or water from entering the reservoir. 2. Visually inspect the fluid level. 3. If necessary, add brake fluid from a clean un-opened MAX container until the level reaches MAX. Do not fill above this line. 4. Use only a DOT 3 brake fluid certified to meet Mazda specification . Refer to Lubricant specifications in this chapter. WARNING: Brake fluid is toxic. If brake fluid contacts the eyes, flush eyes with running water for 15 minutes. Seek medical attention if irritation persists. If taken internally, drink water and induce vomiting. Seek medical attention immediately. WARNING: If you use a brake fluid that is not DOT 3, you will cause permanent damage to your brakes. WARNING: Do not let the reservoir for the master cylinder run dry. This may cause the brakes to fail. 262