2002 Mazda B4000 Owner's Manual - Page 271

Maintenance and Specifications WARNING: When replacing full size tires, never mix radial bias-belted, or bias-type tires. Use only the tire sizes that are listed on the Certification Label. Make sure that all tires are the same size, speed rating, and load-carrying capacity. Use only the tire combinations recommended on the label. If you do not follow these precautions, your vehicle may not drive properly and safely and an accident can occur. WARNING: Make sure that all replacement tires are of the same size, type, load=carrying capacity and tread (e.g., "All Terrain", etc.), as originally offered by Mazda. Failure to do so can result in tire failure and a serious accident. WARNING: Do not replace your tires with "high performance" tires or larger size tires. WARNING: Failure to follow these precautions may adversely affect the handling of the vehicle, damage parts of the tire and make it easier for the driver to lose control and roll over. Tires that are larger or smaller than your vehicle's original tires may also affect the accuracy of your speedometer. SNOW TIRES AND CHAINS WARNING: Driving too fast for conditions creates the possibility of loss of vehicle control. Driving at very high speeds for extended periods of time may result in damage to vehicle components. NOTE: Snow tires must be the same size and grade as the tires you currently have on your vehicle. The tires on your vehicle have all weather treads to provide traction in rain and snow. However, in some climates, you may need to use snow tires and chains. If you need to use snow tires and chains, it is recommended that steel wheels are used of the same size and specifications as those originally installed. Follow these guidelines when using snow tires and chains: • Do not use tire chains on aluminum wheels. Chains may chip the wheels. 271