2002 Mazda B4000 Owner's Manual - Page 99

Locks and Security Power door lock disable feature This feature will help protect your vehicle from unauthorized entry. The UNLOCK function on the power door control will not operate with the ignition OFF and twenty seconds after the doors are closed and electronically locked by the remote entry transmitter, key pad, or power door control (if pressed while the door was open). The UNLOCK function will operate again after you unlock the vehicle using the remote entry transmitter or key pad, turn the ignition to ON, or open the door from inside of the vehicle. Deactivating/activating power door lock disable feature 1. Turn the ignition key to ON, then press the UNLOCK button 3 times. 2. Turn the ignition key to OFF, then press the UNLOCK button 3 times. 3. Turn the ignition key to ON, within five seconds press the UNLOCK button 2 times then LOCK once. U L The user should receive 2 horn chirps to indicate the system has been disabled or 2 chirps followed by a honk to indicate the system has been enabled. Pressing the power door LOCK button two times again will turn the feature ON if it was previously OFF, or OFF if it was previously ON. Every two consecutive presses of the LOCK button after successfully entering the configuration mode will change the enable/disable condition of the feature. Turn ignition to OFF to exit programming. 99