2003 Mazda MAZDA6 Owner's Manual - Page 202
2003 Mazda MAZDA6 Manual
Page 202 highlights
shuseizumi_J56J_8R29_EA_02I.book Page 6 Wednesday, October 16, 2002 9:51 AM In Case of an Emergency Flat Tire M Removing a Flat Tire 1. Pry off the wheel cover with the beveled end of the lug wrench. NOTE Make sure the jack is well lubricated before using it. 1. Park on a level surface off the right-ofway and firmly set the parking brake. 2. Put a vehicle with an automatic transaxle in Park (P), a manual transaxle in Reverse (R) or 1, and turn off the engine. 3. Turn on the hazard warning flasher. 4. Have everyone get out of the vehicle and away from the vehicle and traffic. 5. Remove the jack, tool, and spare tire (page 7-3). 6. Block the wheel diagonally opposite the flat tire. When blocking a wheel, place a block both in front and behind the tire. Wheel cover Lug wrench NOTE Force the end of the lug wrench firmly between wheel and cover, or removal will be difficult. CAUTION Align the notch on the wheel cover with the valve stem when installing it. Notch Tire valve Damage could occur during installation if the wheel cover is not properly aligned. 7-6 Form No. 8R29-EA-02I