2003 Mazda Tribute Owner's Manual - Page 53
2003 Mazda Tribute Manual
Page 53 highlights
Lights Handle a halogen headlamp bulb carefully and keep out of children's reach. Grasp the bulb only by its plastic base and do not touch the glass. The oil from your hands could cause the bulb to break the next time the headlamps are operated. Always wear safety glasses while handling bulbs. NOTE: If the bulb is accidentally touched, it should be cleaned with rubbing alcohol before being used. 7. Insert the glass end of the new bulb into the headlamp assembly. When the bulb's three metal tabs are aligned with the grooves in the plastic base, push the bulb into the lamp assembly until the bulb's metal base contacts the rear of the lamp assembly. 8. Rotate the retainer spring over the bulb plastic base and secure it on the bulb hooks. 9. Install rubber boot on the lamp assembly. 10. Connect the electrical connector into the rear of the plastic base until it "snaps." Replacing brake/tail/turn/backup lamps bulbs The brake/tail/turn/backup lamp bulbs are located in the tail lamp assembly, one just below the other. Follow the same steps to replace either bulb: 1. Open the liftgate to expose the lamp assemblies. 2. Remove the two screws from the lamp assembly. 3. Carefully remove the lamp assembly by pulling it rearward. 4. Twist the bulb socket counterclockwise and remove from lamp assembly. 53