2004 Mazda RX-8 Owner's Manual - Page 118
2004 Mazda RX-8 Manual
Page 118 highlights
J60E_8R65-EA-03C_Edition2.book Page 27 Saturday, April 26, 2003 1:48 PM Driving Your Mazda Starting and Driving M Tires and Wheels Changing tires and wheels The following procedure allows the TPMS to recognize a tire pressure sensor's unique ID signal code whenever tires or wheels are changed, such as changing to and from winter tires. NOTE NOTE Each tire pressure sensor has a unique ID signal code. The signal code must be registered with the TPMS before it can work. The easiest way to do it is to have an Authorized Mazda Dealer change your tire and complete ID signal code registration. When having tires changed at an Authorized Mazda Dealer Tire pressure sensor ID signal code registration is completed when an Authorized Mazda Dealer changes your vehicle's tires. When changing tires yourself If you or someone else changes tires, you or someone else can also undertake the steps for the TPMS to complete the ID signal code registration. 1. After tires have been changed, turn the ignition switch to the ON position, then turn it back to the ACC or LOCK position. 2. Wait for about 15 minutes. 3. After about 15 minutes, drive the vehicle at a speed of at least 20 km/h (12 mph) for several minutes and the tire pressure sensor ID signal code will be registered automatically. If the vehicle is driven within about 15 minutes of changing tires, the tire pressure monitoring system warning light will flash because the sensor ID signal code would not have been registered. If this happens, park the vehicle for about 15 minutes, after which the sensor ID signal code will register upon driving the vehicle for several minutes. Replacing tires and wheels CAUTION • When replacing/repairing the tires or wheels or both, have the work done by an Authorized Mazda Dealer, or the tire pressure sensors may be damaged. • The wheels equipped on your Mazda are specially designed for installation of the tire pressure sensors. Do not use non-genuine wheels, otherwise it may not be possible to install the tire pressure sensors. Be sure to have the tire pressure sensors installed whenever tires or wheels are replaced. When having a tire or wheel or both replaced, the following types of tire pressure sensor installation are possible. • The tire pressure sensor is removed from the old wheel and installed to the new one. • The same tire pressure sensor is used with the same wheel. Only the tire is replaced. 5-27 Form No. 8R65-EA-03C