2004 Mazda RX-8 Owner's Manual - Page 207

J60E_8R65-EA-03C_Edition2.book Page 8 Saturday, April 26, 2003 1:48 PM In Case of an Emergency Flat Tire NOTE CAUTION If there is air remaining in the tire when the valve core is removed, the valve core could fly out. Remove the valve core carefully. 8. Turn the valve core counterclockwise with the valve core tool and remove the valve core. The tire sealant can be used at outside temperatures down to -30°C. In extremely cold temperatures (0°C (32°F) or below), the tire sealant hardens easily and injection of the sealant will be difficult. Warm the sealant inside the vehicle before doing the injection work. 6. Remove the cap from the bottle. Screw on the injection hose with the bottle's inner cap left on to break the inner cap. Valve Valve core Injection hose Bottle NOTE 7. Remove the valve cap from the flat tire. Press the back of a valve core tool to the core of the tire valve and bleed all the remaining air. Valve Store the valve core in a place where it won't get dirty. 9. Remove the plug from the injection hose and insert the injection hose into the valve. Plug Valve cap Injection hose Valve core tool 7-8 Form No. 8R65-EA-03C