2004 Mazda RX-8 Owner's Manual - Page 256

J60E_8R65-EA-03C_Edition2.book Page 31 Saturday, April 26, 2003 1:48 PM Maintenance and Care Owner Maintenance M Replacing a Bulb (Interior) Overhead light/Map lights (Front) 1. Remove the screws with a Phillips screwdriver. 2. Wrap a flathead screwdriver with a soft cloth to prevent damage to the trim and gently insert it in the overhead light as shown in the figure, and then remove the overhead light unit. Overhead light (Rear), Courtesy lights, Vanity mirror lights 1. Wrap a small flathead screwdriver with a soft cloth to prevent damage to the lens and remove the lens by carefully prying on the edge of the lens with the screwdriver. 2. Disconnect the bulb by pulling it out. Overhead light (Rear) Edge Courtesy lights 3. Turn the socket and bulb assembly counterclockwise and remove it. 4. Disconnect the bulb from the socket. Socket Edge Vanity mirror lights 5. Install the new bulb in the reverse order of removal. Edge 8-31 Form No. 8R65-EA-03C