2004 Mazda RX-8 Owner's Manual - Page 257

J60E_8R65-EA-03C_Edition2.book Page 32 Saturday, April 26, 2003 1:48 PM Maintenance and Care Owner Maintenance 3. Install the new bulb in the reverse order of removal. Trunk light 1. Press both sides of the lens cap to remove it. 2. Disconnect the bulb by pulling it out. 2. Turn the socket and bulb assembly counterclockwise and remove it. 3. Disconnect the bulb from the socket. Rear turn signal lights Brake lights/Taillights Reverse lights Socket 4. Install the new bulb in the reverse order of removal. Rear side-marker lights 3. Install the new bulb in the reverse order of removal. Due to the complexity and difficulty of the procedure, the bulbs should be replaced by an Authorized Mazda Dealer. High-mount brake light 1. Turn the center section of the plastic retainer counterclockwise and remove the retainers and trunk rear trim. Removal M Replacing a Bulb (Rear) Rear turn signal lights, Brake lights/ Taillights, Reverse lights 1. Pull the center section of the plastic retainer and remove the retainers and partially open the trunk side trim. Removal Trunk side trim Installation Installation Trunk rear trim 2. Turn the socket and bulb assembly counterclockwise and remove it. 8-32 Form No. 8R65-EA-03C