2004 Mazda Tribute Owner's Manual - Page 55

Lights 5. Pull the bulb straight out of the socket and push in the new bulb. 6. To complete installation, follow the removal procedure in reverse order. Replacing fog lamp bulbs (if equipped) 1. Remove the bulb socket from the fog lamp by turning counterclockwise. 2. Disconnect the electrical connector from the fog lamp bulb. 3. Connect the electrical connector to the new fog lamp bulb. 4. Install the bulb socket in the fog lamp turning clockwise. WARNING: Handle a halogen headlamp bulb carefully and keep out of children's reach. Grasp the bulb only by its plastic base and do not touch the glass. The oil from your hands could cause the bulb to break the next time the headlamps are operated. Always wear safety glasses while handling bulbs. NOTE: If the bulb is accidentally touched, it should be cleaned with rubbing alcohol before being used. Replacing license plate lamp bulbs 1. Remove two screws and the license plate lamp assembly (located above the license plate) from the liftgate. 2. Remove bulb socket from lamp assembly by turning counterclockwise. 3. Pull the bulb out from the socket and push in the new bulb. 4. Install the bulb socket in lamp assembly turning it clockwise, 5. Install the lamp assembly on liftgate with two screws. Replacing high-mount brake lamp bulbs For bulb replacement, see an authorized Mazda dealer. 55