1999 Mercury Villager Owner's Manual - Page 113

Seating and safety restraints The lumbar control is located on the inboard side of the driver's seat. Move the control up or down to adjust lumbar support. Memory seats and mirrors (if equipped) The memory seat control is located on the driver's door panel. The control operates with the ignition in the OFF position or the ignition is in 1 the ON position and the vehicle is in P (Park) or N (Neutral). MEMORY SEAT The two buttons provide three memory positions, one individual 2 position for each button and a third position obtained by pressing buttons 1 and 2 simultaneously. Position three (pressing 1 and 2 simultaneously) is always full rearward and downward for exit mode, but is not programmable. To record the memory positions: 1. Move the seat and mirror to the desired position using the manual controls. 2. Press button 1 or 2 and hold for at least two seconds. The indicator light will stay on until the position is programmed. When the position has been programmed, the indicator light will flash three times. Repeat procedure for second position. To record a remote entry transmitter: 1. Program a desired position to a memory switch as indicated above. 113