1999 Mercury Villager Owner's Manual - Page 228
1999 Mercury Villager Manual
Page 228 highlights
Maintenance and care Replacing high-mount brakelamp bulbs 1. Remove the two screws and lamp assembly from vehicle. 2. Remove the bulb by rotating socket counterclockwise and pulling it out of the lamp assembly. 3. Pull bulb straight out of socket and push in the new bulb. 4. To complete installation, follow removal procedure in the reverse order. Replacing tail lamp/backup/turn signal lamp bulbs 1. Open the liftgate to expose the lamp assemblies. 2. Remove the two screws from the lamp assembly. 3. Carefully remove the lamp assembly by pulling it rearward. 4. Rotate bulb socket counterclockwise and remove from lamp assembly. 5. Carefully pull bulb straight out of the socket and push in the new bulb. 6. To complete installation, follow removal procedure in the reverse order. 228