2004 Mercury Monterey Owner's Manual - Page 96
2004 Mercury Monterey Manual
Page 96 highlights
Locks and Security • recall memory seat/side view mirrors/adjustable pedals position Driver 1 or Driver 2 (if equipped). The keypad can be operated with the factory set 5-digit entry code; this code is located: • on the owner's wallet card in the glove box, • marked on the passenger compartment fuse panel (located below and to the left of the steering, near the brake pedal), • and is available from your authorized dealer. You can also create your own 5-digit personal entry code. When pressing the controls on the keypad, press the middle of the controls to ensure a good activation. Programming a personal entry code To create your own personal entry code(s): 1. Enter the factory set code. Note: The driver's door will unlock. 2. Within five seconds press and release the 1 • 2 on the keypad. Note: The lock motors will cycle, locked then unlocked. 3. Enter your personal 5-digit code. Each number must be entered within five seconds of each other. 4. Enter a sixth digit if you wish to have the personal entry code recall memory position Driver 1 or Driver 2 (if equipped with the memory seat/side view mirrors/adjustable pedals feature). Note: The lock motors will cycle, locked then unlocked. • Press 1 • 2 to recalls the Driver 1 position. • Press 3 • 4 to recalls the Driver 2 position. 5. After five seconds of keypad inactivity, programming mode is exited. All of the vehicle doors will lock and unlock to confirm the code has been stored. Each memory feature driver position (Driver 1 or Driver 2) can be associated with only one personal code. The factory-set code cannot be associated with a memory recall position. You can program up to three personal codes; these codes do not replace the factory-set code. 96 2004 Monterey (mty) Owners Guide (post-2002-fmt) USA English (fus)