2004 Mercury Mountaineer Owner's Manual - Page 87
2004 Mercury Mountaineer Manual
Page 87 highlights
Locks and Security To open the liftgate window, press the 5 • 6 control within five seconds. To lock all doors, liftgate and liftgate window, press the 7 • 8 and the 9 • 0 at the same time. Note: The driver's door must be closed. You do not need to enter the keypad code first. Autolock The autolock feature will lock all the doors, liftgate and liftgate window when: • all the doors, the liftgate and liftgate window are closed, • the ignition is in the 3 (ON) position, • you shift into any gear putting the vehicle in motion, and • the brake pedal is released and the vehicle attains a speed greater than 8 km/h (5 mph). The autolock feature repeats when: • any door, liftgate or liftgate window is opened then closed while the ignition is in the 3 (ON) position, and • you put the vehicle in motion by releasing the brake pedal and the vehicle attains a speed greater than 8 km/h (5 mph). Deactivating/activating autolock Your vehicle comes with the autolock feature activated. There are four methods to enable/disable this feature: One is through your dealer, the second with a power door unlock/lock sequence, the third with the keypad, and the fourth by using the message center (if equipped). Before following the activation or deactivation procedures, make sure that the anti-theft system is not armed, ignition is off, and all vehicle doors, liftgate and liftgate window are closed. Power door unlock/lock procedure You must complete steps 1-5 within 30 seconds or the procedure will have to be repeated. If the procedure needs to be repeated, you must wait 30 seconds. 1. Turn the ignition to the 3 (ON) position. 2. Press the power door unlock control three times. 87 2004 Mountaineer (mnt) Owners Guide (post-2002-fmt) USA English (fus)