2004 Mercury Mountaineer Owner's Manual - Page 42

Lights Replacing foglamp bulbs 1. Make sure the headlamp switch is in the OFF position and then remove the plastic splash shield, by removing the two screws on the front of the fenderwell. 2. Remove the bulb socket from the foglamp by turning it counterclockwise. 3. Disconnect the electrical connector. Reverse steps to reinstall bulb(s). Replacing license plate lamp bulbs 1. Make sure the headlamp switch is in the OFF position and then remove two screws and the license plate lamp assembly. 2. Remove the bulb socket from the lamp assembly by turning counterclockwise and pull the bulb straight out. Reverse steps to reinstall bulb(s). Replacing high-mount brakelamp bulb 1. Remove the two screws and lamp assembly from vehicle. 2. Remove the bulb socket from the lamp assembly by depressing the snaps and pull the bulb straight out. Reverse steps to reinstall bulb(s). 42 2004 Mountaineer (mnt) Owners Guide (post-2002-fmt) USA English (fus)