2004 Mercury Mountaineer Owner's Manual - Page 95

Seating and Safety Restraints Memory seat/easy entry/exit feature (if equipped) This system allows automatic positioning of the driver seat to three programmable positions. SET The memory seat control is located on the driver door. • To program position one, move the driver seat to the desired 1 2 position using the seat controls. Press the SET control. The SET control indicator light will briefly illuminate. While the light is illuminated, press control 1. • To program position two, repeat the previous procedure using control 2. • To program position three, push buttons 1 and 2 simultaneously. A position can only be set or recalled when the transmission gearshift is in Park or Neutral. A memory seat position may be programmed at any time. The memory seat positions are also recalled when you press your remote entry transmitter UNLOCK control. The third position is recalled when both buttons are depressed. To program the memory seat to remote entry transmitter, refer to Remote entry system in the Locks and Security chapter. The easy entry/exit feature automatically moves the drivers seat backwards slightly (if room is available) when the key is removed from the ignition. It will automatically move the seat forward to the original position when the key is inserted into the ignition. 95 2004 Mountaineer (mnt) Owners Guide (post-2002-fmt) USA English (fus)