2007 Mercury Milan Owner Guide 1st Printing - Page 181

Driving MANUAL TRANSMISSION OPERATION (IF EQUIPPED) 1 2 3 4 5 R Using the clutch The manual transaxle has a starter interlock that prevents cranking the engine unless the clutch pedal is fully depressed. To start the vehicle: 1. Make sure the parking brake is fully set. 2. Press the clutch pedal to the floor, then put the gearshift lever in the neutral position. 3. Start the engine, then press the brake pedal and release the parking brake. 4. Move the gearshift lever to the desired gear, 1 (First) or R (Reverse) then slowly release the clutch pedal while slowly pressing on the accelerator. Do not drive with your foot resting on the clutch pedal or use the clutch pedal to hold your vehicle at a standstill while waiting on a hill. These actions will reduce the life of the clutch. Recommended shift speeds Do not downshift into 1 (First) when your vehicle is moving faster than 15 mph (24 km/h). This will damage the clutch. Upshift according to the following chart: Recommended upshifts (for best fuel economy) when accelerating 5-speed manual transaxle Shift from: 1-2 14 mph (23 km/h) 2-3 24 mph (39 km/h) 181 2007 Milan (mln) Owners Guide (post-2002-fmt) USA (fus)