2007 Mercury Milan Owner Guide 1st Printing - Page 234

Maintenance and Specifications • 2.3L I4 engine • 3.0L DOHC V6 Duratec engine •Do not overfill the engine with oil. Oil levels above this mark may cause engine damage. If the engine is overfilled, some oil must be removed from the engine by an authorized dealer. 7. Put the indicator back in and ensure it is fully seated. On 2.3L I4 engine, be sure the notch in the indicator flange is aligned with the V on the engine when it is reinserted. Adding engine oil 1. Check the engine oil. For instructions, refer to Checking the engine oil in this chapter. 2. If the engine oil level is not within the normal operating range, add only certified engine oil of the recommended viscosity. Remove the engine oil filler cap and use a funnel to pour the engine oil into the opening. 3. Recheck the engine oil level. Make sure the oil level is not above the normal operating range on the engine oil level indicator (dipstick). 4. Install the indicator and ensure it is fully seated. 234 2007 Milan (mln) Owners Guide (post-2002-fmt) USA (fus)