2007 Mercury Milan Owner Guide 1st Printing - Page 52

Lights Using the right bulbs Replacement bulbs are specified in the chart below. Headlamp bulbs must be marked with an authorized "D.O.T." for North America and an "E" for Europe to ensure lamp performance, light brightness and pattern and safe visibility. The correct bulbs will not damage the lamp assembly or void the lamp assembly warranty and will provide quality bulb burn time. Function Headlamp high beam Headlamp low beam Front park/turn signal lamp Number of bulbs 2 2 2 Trade number H7 H11LL 3457NAK (amber) 168 SNAP LED 70 LED 3157 A (amber) 921 C5W 921 H11 12V6W 578 Front sidemarker lamp 2 *Rear sidemarker lamp N/A *Stop/tail lamp N/A Rear turn signal lamp 2 Backup lamp 2 License plate lamp 2 High-mount brake lamp 1 Foglamp (if equipped) 2 Map lamp 2 Dome/reading lamp 6 Visor vanity lamp - Slide on 2 37 or 14V1CP Rail system (SOR) Puddle lamp (if equipped) 2 W5W Glove box lamp 1 194 Luggage compartment lamp 1 578 All replacement bulbs are clear in color except where noted. To replace all instrument panel lights - see your authorized dealer. *To replace these lamps - see your authorized dealer. Replacing headlamp bulbs Highbeam bulb replacement 1. Make sure headlamp switch is in the OFF position, then open the hood. 2. Reach over the front bolster. 52 2007 Milan (mln) Owners Guide (post-2002-fmt) USA (fus)