2008 Mercury Sable Owner's Manual - Page 79
2008 Mercury Sable Manual
Page 79 highlights
Climate Controls 8. Airflow direction control: Press to toggle through the air distribution modes listed below. The selected mode will be shown in the display. : Distributes air through the instrument panel and center console vents (if equipped). : Distributes air through the instrument panel, floor and center console vents (if equipped). : Distributes air through the floor vents. Note: You may notice a small amount of air flowing from the demister and defroster vents. : Distributes air through the windshield defroster, demister and floor vents. 9. Manual override controls: Allows you to manually select where airflow is directed. To return to full automatic control, press AUTO. Driver heated seat control: Press to heat the driver seat. Press 10. once to activate high heat (two indicator lights). Press again to activate low heat (one indicator light). Press again to deactivate the driver heated seat. Front fan speed control: Press to manually increase or 11. decrease the fan speed. To return to automatic fan operation, press AUTO. 12. EXT: Press to display outside temperature. Press again to display cabin temperature settings. 13. °F/°C (Temperature conversions): Press to switch temperature display between Fahrenheit and Celsius. 14. OFF: Outside air is shut out and the climate control system is turned off. 15. Driver temperature control: Press to increase/decrease the temperature on the driver side of the cabin. Sets the passenger side temperature also when DUAL is disengaged. The recommended vehicle cabin setting is between 72°F (22°C) and 75°F (24°C). 16. AUTO: Press to engage automatic temperature control. Select the desired temperature using the temperature control. The system will automatically determine fan speed, airflow location, A/C on or off, and outside or recirculated air, to heat or cool the vehicle to reach the desired temperature. 79 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus)