2008 Mercury Sable Owner's Manual
2008 Mercury Sable Manual
2008 Mercury Sable manual content summary:
- 2008 Mercury Sable | Owner's Manual - Page 1
44 73 73 Climate Controls Manual heating and air conditioning Automatic temperature control Rear window defroster 74 74 76 81 Lights Headlamps Turn signal control Bulb replacement 82 82 86 87 Driver Controls Windshield wiper/washer control Steering wheel adjustment Power windows Mirrors Speed - 2008 Mercury Sable | Owner's Manual - Page 2
Brakes Traction Control™ Transmission operation 221 221 226 230 232 Roadside Emergencies Getting roadside assistance Hazard flasher switch Fuel pump shut-off switch Fuses and relays Changing tires Lug nut torque Jump starting Wrecker towing 244 244 246 246 247 253 260 261 266 2 2008 Sable - 2008 Mercury Sable | Owner's Manual - Page 3
275 Cleaning Maintenance and Specifications Engine compartment Engine oil Battery Engine coolant Fuel information Air filter(s) Part numbers Maintenance product specifications and capacities Engine data 276 283 285 287 290 292 297 311 312 313 316 Accessories Index 319 321 All rights reserved - 2008 Mercury Sable | Owner's Manual - Page 4
safety switch will automatically cut off the fuel supply to the engine. The switch can also be activated through sudden vibration (e.g. collision when parking). To reset the switch, refer to the Fuel pump shut-off switch in the Roadside Emergencies chapter. 4 2008 Sable (mgo) Owners Guide (post - 2008 Mercury Sable | Owner's Manual - Page 5
frequently in order to give the moving parts a chance to break in. Drive your new vehicle at least 1,000 covered and what is not covered by your vehicle's New Vehicle Limited Warranty, refer to the Warranty Guide that is provided to you along with your Owner's Guide. 5 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 6
such as engine, throttle, steering or brake systems. In order to properly diagnose and service your vehicle, Ford Motor Company, Ford of Canada, and service and repair facilities may to court order or where required by law enforcement, 6 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 7
not essential to the driving task when it Guide is written primarily for the U.S. and Canadian Markets. Features or equipment listed as standard may be different on units built for Export. Refer to this Owner's Guide for all other required information and warnings. 7 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 8
-Lock Brake System Brake Fluid Non-Petroleum Based Stability Control System Speed Control Master Lighting Switch Hazard Warning Flasher Fog Lamps-Front Fuse Compartment Fuel Pump Reset Windshield Defrost/Demist Windshield Wash/Wipe Rear Window Defrost/Demist 8 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 9
, Flames, or Sparks Explosive Gas Battery Acid Fan Warning Maintain Correct Fluid Level Engine Air Filter Jack MAX MIN Power Steering Fluid Service Engine Soon Passenger Compartment Air Filter Check Fuel Cap Low Tire Pressure Warning 9 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus - 2008 Mercury Sable | Owner's Manual - Page 10
chapter. If the light is blinking, engine misfire is occurring which could damage your catalytic converter. Drive in a moderate fashion (avoid heavy acceleration and deceleration) and have your vehicle serviced immediately by your authorized dealer. 10 2008 Sable (mgo) Owners Guide (post-2002-fmt - 2008 Mercury Sable | Owner's Manual - Page 11
a fire. Check fuel cap (if equipped): Illuminates when the fuel cap may not be properly installed. Continued driving with this light on may cause the Service engine soon warning light to come on, refer to Fuel filler cap in the Maintenance and Specification chapter. Brake system warning light: To - 2008 Mercury Sable | Owner's Manual - Page 12
the system serviced immediately, refer to the Driving chapter for more information. Low tire pressure warning: Illuminates when your tire pressure is low. If the light remains ON at start up or while driving, the tire pressure should be checked. Refer to Inflating your tires in the Tires, Wheels and - 2008 Mercury Sable | Owner's Manual - Page 13
Driving chapter. If the light flashes steadily or does not illuminate, have the transmission serviced soon, or damage may occur. Anti-theft system: Flashes when the SecuriLock™ Passive Anti-theft System has been activated. Throttle Control/Transmission: Illuminates when a powertrain or an AWD fault - 2008 Mercury Sable | Owner's Manual - Page 14
"H" and "C"). If it enters the red section, the engine is overheating. Stop the vehicle as soon as safely possible, switch off the engine and let the engine cool. Never remove the coolant reservoir cap while the engine is running or hot. 14 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 15
speed in revolutions per minute. Driving with your tachometer pointer continuously at the top of the scale may damage the engine. Odometer: Registers the total miles (kilometers) of the vehicle. Refer to Message center in the Drivers Controls chapter on how to switch the display from Metric to - 2008 Mercury Sable | Owner's Manual - Page 16
use cell phones and other devices not essential to the driving task when it is safe to do so. Listening to /FM repeatedly to choose between AM/FM1/FM2 frequency bands. / to manually go 3. Press up/down the frequency band. SEEK to search Press 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 17
# and the channel name will appear on the display. Listening to a CD/MP3 (if equipped) 1. If the audio system is turned off, press on. 2. Press CD to enter CD mode. If a disc is already loaded into the system, CD play will begin where it ended last. 17 2008 Sable (mgo) Owners Guide (post-2002- - 2008 Mercury Sable | Owner's Manual - Page 18
. Press and hold FF to manually advance in a CD/MP3 track. While in folder mode, press FOLDER to access the previous folder on MP3 discs, if available. While in folder mode, press to access the next FOLDER folder on MP3 discs, if available. 18 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus - 2008 Mercury Sable | Owner's Manual - Page 19
read REMOVE CD. If the disc is not removed in 15 seconds, the system will reload the disc. until the system To auto eject up to 6 discs, press and hold begins ejecting all loaded discs. If the discs are not removed, the system will reload the discs. 19 2008 Sable (mgo) Owners Guide (post-2002 - 2008 Mercury Sable | Owner's Manual - Page 20
or until either front door is opened. / (Tuner): Press to 1. manually go up or down the radio frequency. Also use in menu mode to select various settings. In satellite radio mode (if equipped), press next/previous channel. / to tune to the 20 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 21
valid SIRIUS radio subscription. Check with your authorized dealer for availability. Note: If your vehicle is equipped with Satellite Radio, you will either have the CATEGORY option above or the CATEOGRY option within the SATELLITE RADIO MENU below. 21 2008 Sable (mgo) Owners Guide (post-2002-fmt - 2008 Mercury Sable | Owner's Manual - Page 22
through the saved songs. When the song appears in the display that you would like to replace, press OK. SONG REPLACED will appear in the display. • DELETE SONG: Press OK to delete a song from the alerts you when your selected songs are 22 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 23
is available only with a valid SIRIUS radio subscription. Check with your authorized dealer for availability. AUTOSET: Press strongest local radio stations without losing your / to original manually set preset stations for AM/FM1/FM2. Use turn 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 24
automatically change soft and loud CD passages together For location and Check with your authorized dealer for availability. If your vehicle is equipped with a Family Entertainment System (FES) please refer to the Family Entertainment DVD system later in this chapter. 24 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 25
Check with your authorized dealer for availability. / OK:(Play/Pause): This 6. control is operational in CD and DVD mode (if equipped). When a CD playing. CD SHUF will appear in the display. To disengage, press SHUFFLE. SHUFFLE OFF will appear in the display. 25 2008 Sable (mgo) Owners Guide (post- - 2008 Mercury Sable | Owner's Manual - Page 26
manually advance in a CD/MP3 track. 11. REW (Rewind): Press REW to manually reverse in a CD/ Check with your authorized dealer for availability. 13. TEXT/SCAN: In radio and CD/MP3 mode, press and hold for a brief sampling of radio stations or CD 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 27
SIRIUS radio subscription. Check with your authorized dealer CD/MP3 play will begin where it ended last. If no CD is loaded, NO DISC will appear in the display. (CD eject): Press to eject a 17. CD/MP3. 18. CD slot: Insert a CD/MP3 label side up in the CD slot. 27 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 28
): 1. In radio mode, press to manually ) or down ( ) the go up ( radio frequency. Press and hold for a fast advance through radio frequencies. In menu mode, use to select various settings. In CD/MP3 mode, press to select the desired disc. 28 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 29
with a valid SIRIUS radio subscription. Check with your authorized dealer for availability. mode If your vehicle is equipped with an in-dash clock, refer to "Setting the clock" in the available only with a valid SIRIUS radio subscription. Check with your authorized dealer for availability. Note: - 2008 Mercury Sable | Owner's Manual - Page 30
through the saved songs. When the song appears in the display that you would like to replace, press OK. SONG REPLACED will appear in the display. • DELETE SONG: Press OK to delete a song from the alerts you when your selected songs are 30 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 31
is available only with a valid SIRIUS radio subscription. Check with your authorized dealer for availability. AUTOSET: Press set the strongest local radio stations without losing your original manually set preset stations for AM/FM1/FM2. Use / 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 32
volume to automatically change slightly with will bring soft and loud CD passages together for a more if equipped). For location and further information Check with your authorized dealer for availability. For further information on SYNC, refer to the SYNC supplement. 32 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 33
Check with your authorized dealer for availability. OK:(Play/Pause): This 6. control is operational in CD and DVD mode (if equipped). When a CD playing. CD SHUF will appear in the display. To disengage, press SHUFFLE again. SHUFFLE OFF will appear in the display. 33 2008 Sable (mgo) Owners Guide ( - 2008 Mercury Sable | Owner's Manual - Page 34
manually advance in a CD/MP3 track. 11. REW (Rewind): Press REW to manually reverse in a CD/ Check with your authorized dealer for availability. 13. TEXT/SCAN: In radio and CD/MP3 mode, press and hold for a brief sampling of radio stations or CD 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 35
valid SIRIUS radio subscription. Check with your authorized dealer for switch is turned back on. 16. CD: Press to enter CD/MP3 mode. If a CD/MP3 is already loaded into the system, CD system will choose for you. To auto load up to 6 discs, press 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 36
until the system begins To auto eject up to 6 CDs, press and hold ejecting all loaded discs . CD slot: Insert a CD/MP3 label side up. Auxiliary input jack (Line in) Driving while please observe the following instructions when attaching your portable 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 37
parked and the radio turned off. 2. Ensure that the battery in your portable music player is new or fully charged and of the FM station or CD by switching back and forth between the AUX and FM or CD controls. Troubleshooting: 1. Do not connect 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 38
Entertainment Systems location, such as the center console or the glove box, when the vehicle is in motion. The audio extension cable must be long enough to allow the portable music player to be safely stored while the vehicle is in motion. USB port (if equipped) Driving while distracted can result - 2008 Mercury Sable | Owner's Manual - Page 39
• Inspect discs before playing. • Clean only with an approved CD cleaner. • Wipe discs from the center out. Don't: • Expose discs to direct sunlight or heat Ford CD players. Do not use any irregular shaped CDs or discs with a scratch protection film attached. 39 2008 Sable (mgo) Owners Guide (post - 2008 Mercury Sable | Owner's Manual - Page 40
The CD player numbers all MP3 tracks on the disc (noted by the .mp3 file extension) and all folders containing MP3 files, from F001 (folder) T001 (track) to F253 T255. • Creating discs with only one level of folders will help with navigation through the disc files. 40 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 41
your vehicle has been equipped with a satellite radio antenna located on the roof of your vehicle. The vehicle roof provides the best location for an unobstructed, open view of the sky, a requirement far away from the antenna as possible. 41 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 42
service: SIRIUS Satellite Radio is a subscription based satellite radio service that broadcasts music, sports, news and entertainment programming. A service fee is required in order to receive SIRIUS service Preset 1 control simultaneously. 42 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 43
an ignition key cycle, your receiver may have a fault. See your authorized dealer for service. Channel no longer This previously available. available channel is no longer available. Tune to another FAULT INVALID CHNL UNSUBSCRIBED NO TEXT 43 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 44
properly. Loss of signal from You are in a location the SIRIUS satellite or that is blocking the SIRIUS may take up to progress. three minutes. Satellite service has Call SIRIUS at 1-888-539-7474 to driving task when it is safe to do so. 44 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 45
-R, DVD-R/W discs as well as audio CDs and video CDs. To ensure proper disc operation, check the disc for finger prints, scratches and cleanliness. Clean with a soft cloth, wiping from center to edge. 1. Ensure that the vehicle ignition is in the RUN or ACCESSORY position. 2. Insert a DVD into the - 2008 Mercury Sable | Owner's Manual - Page 46
, check the disc for finger prints and scratches. Clean the disc with a soft cloth, wiping from the center to the edge. 1. Ensure that the vehicle ignition is in the RUN or ACCESSORY position. 2. Insert a CD into the system, label-side up to turn on the DVD system. It will load and automatically - 2008 Mercury Sable | Owner's Manual - Page 47
in the RUN or ACCESSORY position. 2. Press the power button to turn the DVD system on. The indicator light next to the power will remain black. If the video source is set to DVD-AUX, the display will automatically turn on if a video signal is detected. 47 2008 Sable (mgo) Owners Guide (post-2002 - 2008 Mercury Sable | Owner's Manual - Page 48
wired headphones for further information. • Black (4) - wired headphone output ( change the active channel by pressing the A or B headphone control button. Note: Channel A can access any possible media source (AM, FM1, FM2, SAT (if equipped), CD 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 49
select the desired playing media for that headset. When a headphone channel has been selected (A or B), selections will affect the source on that channel only. 49 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 50
while playing a disc to pause a DVD or CD. 6. On/Off: Press to turn the DVD automatically turn on. 8. Infrared (IR) Receiver & Transmitter: System sensor which reads the signals from the remote control and sends audio signals to the infrared (IR) wireless headphones. 50 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 51
radio. Note: Channel A can access any possible media source (AM, FM1, FM2, SAT (if equipped), CD, DVD, DVD-AUX). Channel B can only access DVD and DVD-AUX sources. 13. RETURN: Press to . For more detailed information, refer to Menu mode. 51 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 52
with the remote control. Always point the remote control directly at the player. Ensure that there are no obstructions between the remote and player. 52 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 53
, press to increase ( ) the volume over all speakers. When in Dual Play, press to decrease ( increase ( ) or decrease ( ) the volume for the wired headphones. 53 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 54
same time to perform the same function. 13. Keypad: Use the numeric controls to enter in a specific CD/MP3 track or DVD chapter to be played. 14. C (Cancel): Press to cancel/clear the numeric : Press to select the highlighted menu option. 54 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 55
the headphones while driving the vehicle. Using headphones may prevent the driver from hearing audible warnings such as horns or emergency sirens, which could result in a crash causing serious injury. Give your full attention to driving and to the road. 55 2008 Sable (mgo) Owners Guide (post-2002 - 2008 Mercury Sable | Owner's Manual - Page 56
. (Batteries are included.) Additional infrared wireless headphones may be purchased for use with the system. Also, wired headphones may be purchased and plugged in where indicated on the left and right hand sides of the system. Refer to Wired Headphones below. 56 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 57
at the bottom of the cover. Then, lightly press down on top and slide the cover off. When replacing the batteries, use two new batteries (alkaline recommended) and install them with the correct orientation as indicated in the battery housing. 57 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA - 2008 Mercury Sable | Owner's Manual - Page 58
on the headphones. A red indicator light will illuminate indicating the headphones are set of wireless headphones by using the A/B selection switch on the ear piece. • Adjust the volume infrared signal is received), the wireless headphones will automatically turn off. They will also turn off after - 2008 Mercury Sable | Owner's Manual - Page 59
, which could result in a crash causing serious injury. Give your full attention to driving and to the road. You the Channel A source. The wired headphone jack for Channel B is located on B. Headphones plugged into the right side of the FES and 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 60
to the radio, CD, MP3, DVD, change the audio source for Channel B. Press MEDIA to change the audio source for Channel B. This information will display on the DVD system screen. Channel B can listen to either the DVD media or the DVD system auxiliary inputs (DVD-AUX). 60 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 61
Entertainment Systems Operation with an aftermarket audio system (Headphone only mode) When the Family Entertainment System (FES) detects that 4. LANGUAGE 5. SUB TITLES Angle mode Select ANGLE to select various angles of view for the DVD. 61 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 62
Once you have made your selection, press ENTER to confirm. The LCD screen display will immediately change to your selection after the system resumes playback of the DVD. The system default is WIDE , Spanish, French). This is disc dependent. 62 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 63
CD into the DVD system, label side up. 4. The track and elapsed time will appear in the status bar. Use the DVD cursor controls on the bezel to highlight which track you would like to play. You can also use the cursor controls to highlight COMPRESSION, SHUFFLE or 63 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 64
storage capacity. We do not recommend using high capacity discs containing 700MB of storage. • Disc type - Some CD-RW discs may operate inconsistently and may cause an error message to appear. We recommend burning MP3 files onto CD-R discs. 64 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 65
Bit rate - The player supports bit rates from 32-320 distortion. CD, MP3 and CD player of the CD player (if equipped). • CD-R and CD-RW discs, which are more susceptible to damage from heat, light and stress than are regular CDs other than a compact disc (CD) or digital versatile disc (DVD - 2008 Mercury Sable | Owner's Manual - Page 66
point pens may damage CDs or DVDs. Please contact your authorized dealer for further information. Playing a DVD 1. Ensure that the vehicle ignition is in the RUN or ACCESSORY position. 2. Ensure mode to navigate through the menu selections. 66 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 67
used to plug in wired headphones or to connect and play auxiliary electronic devices such as game systems, personal camcorders, video cassette recorders, etc. 67 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 68
left channel audio input 3. Red: right channel audio input 4. Black: wired headphone jack ( not included) The B headphone jack (5) is located on the right side of the DVD system. Plug in wired PLAY • DVD LOAD • DVD MENU • DVD STOP 68 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 69
in a few different ways. The DVD system is automatically activated when the vehicle ignition is ON, which allows the states are FULL (enabled), LOCAL or LOCKED (disabled). To change the level of control, press the memory preset controls 3 and 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 70
operation of their vehicle. Only use cell phones and other devices not essential to the driving task when it is safe to do so. Read all of the safety and operating instructions before operating the system and retain for future reference. 70 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 71
any part of the DVD player with benzene, paint thinner or any other solvent. Federal Communication Commission (FCC) Compliance Changes or modifications not approved by Ford Lincoln-Mercury could void user's authority to operate the equipment. This equipment has been 71 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 72
time, wait until the cabin temperature of the vehicle is at normal temperature before operating the system. Humidity and moisture condensation Moisture in the air will condense in the system OFF and consult a qualified service technician. 72 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 73
of water or any ammonia-based household glass cleaner directly to solvents. Overspray from these fluids could drip down into the CD cleaner and wipe from the center out to the edge. Do not use circular motion. Compatibility with aftermarket 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 74
information. 5. A/C: Press to activate/deactivate air conditioning. Use with recirculated air to improve cooling performance and efficiency. Engages (defrost) and (floor/defrost). automatically in MAX A/C, Cannot be disabled in MAX A/C mode. 74 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus - 2008 Mercury Sable | Owner's Manual - Page 75
vehicle: do not drive with the airflow selector in the O (OFF) or with recirculated air engaged. • , ice or leaves from the air intake area at the base of the windshield. • For if so equipped) until the engine temperature gauge crosses into the 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 76
automatically in AUTO, defrost and floor/defrost. : Distributes air through the windshield defroster, demister and 6. floor vents. : Distributes air through the floor vents. Note: You may notice a 7. small amount of air flowing from the demister and defroster vents. 76 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 77
, press AUTO and select the desired temperature using the temperature control. The system will automatically determine fan speed, airflow location, A/C on or off, and outside or recirculated air, to heat or cool the vehicle to reach the desired temperature. 77 2008 Sable (mgo) Owners Guide (post - 2008 Mercury Sable | Owner's Manual - Page 78
may turn off automatically in all airflow selections. 7. A/C: Press to activate/deactivate air conditioning. Use with recirculated air to improve cooling performance and efficiency. Engages automatically in AUTO, defrost and floor/defrost. 78 2008 Sable (mgo) Owners Guide (post-2002-fmt - 2008 Mercury Sable | Owner's Manual - Page 79
the desired temperature using the temperature control. The system will automatically determine fan speed, airflow location, A/C on or off, and outside or recirculated air, to heat or cool the vehicle to reach the desired temperature. 79 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 80
the air intake area at the base of the windshield. • For maximum cooling performance (MAX A/C): In AUTO mode, press AUTO control and set to desired temperature. or , A/C and recirculated In manual override in a collision or sudden stop. 80 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 81
rear window defroster. The rear defroster turns off automatically after 10 minutes or when the ignition is turned to the 1 (LOCK) position. To manually turn off the defroster before 10 minutes have and will not be covered by your warranty. 81 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 82
provides light sensitive automatic on-off control of the exterior lights normally changed. To program the auto lamp exit time delay: 1. Start with the ignition in the LOCK position and the headlamp control in the autolamp position. 2. Turn the headlamp switch to 82 . 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 83
the high beams are active. High beams Push the lever toward the instrument panel to activate. Pull the lever towards you to deactivate. OFF 83 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 84
• the transmission must be out battery is installed, the dimmer switch requires re-calibration. Rotate the dimmer switch from the full dim position to the full Dome/ON position to reset. This will ensure that your displays are visible under all lighting conditions. 84 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 85
adjusting the other. 4. On the wall or screen you will observe an area of high intensity light. The top of the high intensity area should touch the horizontal reference line, if not, the beam will need to be adjusted using the next step. 85 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 86
the left turn signal. • Push up to activate the right turn signal. INTERIOR LAMPS Dome lamps and map lamps The map lamps are located on the overhead console. Press the controls on either side of each map lamp to turn on the lamps. 86 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 87
Lights Your vehicle may also have reading lamps within the rear dome lamp(s). Press the switches on either side of the dome lamp to turn on the lamps. BULB REPLACEMENT Headlamp Condensation The headlamps are vented to equalize pressure. When moist air enters the headlamp(s) through the vents, there - 2008 Mercury Sable | Owner's Manual - Page 88
-mount brake lamp N/A Fog lamp (if equipped) 2 Map lamp 2 Dome/reading lamp 6 All replacement bulbs are clear in color except where noted. To replace all instrument panel lights - see your authorized dealer. *To replace these lamps - see your authorized dealer. Replacing the interior bulbs Check the - 2008 Mercury Sable | Owner's Manual - Page 89
are located in the tail lamp assembly. Follow the same steps to replace either bulb. Note: Your vehicle is equipped with a stop/tail lamp assembly containing integral multiple light emitting diodes (LED). If replacement is required, see your authorized dealer. 89 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 90
sure the headlamp switch is in the OFF position. 2. Remove the two screws from the license plate lamp assembly. 3. Remove bulb socket by turning counterclockwise. 4. Carefully pull the bulb out from the socket. Install new bulb(s) in reverse order. 90 2008 Sable (mgo) Owners Guide (post-2002-fmt - 2008 Mercury Sable | Owner's Manual - Page 91
Lights Replacing fog lamp bulbs 1. Make sure the fog lamp switch is in the OFF position. 2. Remove the bulb socket from the fog lamp by turning counterclockwise. 3. Disconnect the electrical connector. Install the new bulb in reverse order. 91 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus - 2008 Mercury Sable | Owner's Manual - Page 92
washer when the washer reservoir is empty. This may cause the washer pump to overheat. Check the washer fluid level frequently. Do not operate the wipers when the windshield is dry. This may scratch the on (for a fixed period of time). 92 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 93
location. 3. Pull the steering wheel release control up. This will lock the steering wheel in position. Never adjust the steering wheel when the vehicle is moving. ILLUMINATED VISOR MIRROR Lift the mirror cover back towards the windshield. 93 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 94
objects. Press the control to open the storage compartment. OVERHEAD CONSOLE The appearance of your vehicle's overhead console will vary according to your option package. Storage compartment The forward. Press and hold to fast forward. 94 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 95
chapter for information on checking and replacing fuses. To have full capacity usage of your power point, the engine is required to be running to avoid unintentional discharge of the battery. To prevent the battery from being discharged: 95 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA - 2008 Mercury Sable | Owner's Manual - Page 96
keep the power point caps closed when not being used. A third rear auxiliary power point is located on the rear of the center console. The power point is accessible from the rear seat. Cigar/Cigarette lighter (if equipped) Do not plug optional electrical accessories into the cigarette lighter - 2008 Mercury Sable | Owner's Manual - Page 97
operation. If the switch is pressed and held to the normal open or ONE TOUCH DOWN position during a ONE TOUCH UP event, the window will stop. If, after 1/2 second the switch is still held, the window will perform a normal open or ONE TOUCH DOWN. 97 2008 Sable (mgo) Owners Guide (post-2002-fmt - 2008 Mercury Sable | Owner's Manual - Page 98
automatically reverse direction and move down. This is known as "bounce-back". If the ignition is turned OFF (without accessory support arm which lets you adjust the mirror UP or DOWN and from SIDE to SIDE. Do not adjust the mirror while the vehicle is in motion. 98 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 99
mirror performance. Do not clean the housing or glass of any mirror with harsh abrasives, fuel or other petroleum-based cleaning products. EXTERIOR MIRRORS Power side view mirrors Do not adjust the mirror while the vehicle is in motion. 99 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 100
is stopped and the gearshift lever is in the P (Park) position. Press and hold the rocker control (located on the instrument panel) to adjust accelerator and brake pedal. • Press the top of the control to adjust the pedals away from you. 100 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 101
or unpaved. Setting speed control The controls for using your speed control are located on the steering wheel for your convenience. 1. Press the ON control and release it. 2. Accelerate to the desired speed. OFF ON CNCL RSM SET SET 101 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 102
brake pedal or press CNCL (Cancel). Disengaging the speed control will not erase previous set speed. Resuming a set speed Press the RES control and release it. This will automatically return the vehicle to the previously set speed. OFF ON CNCL RSM SET SET 102 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 103
set speed in small amounts by 1 mph (1.6 km/h). • Use the accelerator pedal to get to the desired speed. When the vehicle reaches that speed vehicle set speed in small amounts by 1 mph (1.6 km/h). • Depress the brake pedal or press CNCL (Cancel) until the desired vehicle speed is reached, press - 2008 Mercury Sable | Owner's Manual - Page 104
driving task when it is safe to do so. Radio control features Press MEDIA to select: • AM, FM1, FM2 • SAT1, SAT2 or SAT3 (Satellite Radio mode if equipped). • CD • LINE IN (Auxiliary input jack) (if equipped) OFF ON CNCL RSM SET SET VOL SEEK MEDIA MUTE 104 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 105
previous strong station. • Press and hold SEEK to fast advance through preset channels or subscribed channels. In CD mode: • Press SEEK to listen to the next track on the disc. In any mode: • system, refer to the Navigation supplement. 105 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 106
open the moon roof, press the rear portion of the control (to the first detent). To activate the automatic, one-touch, express open feature, press the rear portion of the control (to the second detent) proximity of the moon roof opening. 106 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 107
damage. Do not use the HomeLink Wireless Control System with any garage door opener that lacks safety stop and reverse features as required by 107 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 108
, press and hold the just-trained HomeLink button and observe the indicator light. • If the indicator light stays on constantly, programming is complete and your device should activate when the HomeLink button is pressed and released. 108 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 109
and release - every two seconds ("cycle") your hand-held transmitter until the frequency signal has been accepted by the HomeLink . The indicator light will flash slowly and then rapidly after HomeLink accepts the radio frequency signal. 109 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 110
the button. 2. The indicator light will begin to flash after 20 seconds. Without releasing the HomeLink button, follow Step 1 in the "Programming" section. For questions or comments, contact HomeLink at www.homelink.com or 1-800-355-3515. 110 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA - 2008 Mercury Sable | Owner's Manual - Page 111
the INFO menu estimates approximately how far you can drive with the fuel remaining in your tank under normal driving conditions. Remember to turn the ignition OFF when refueling to allow this feature to correctly detect the added fuel. 111 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 112
in the automatic shut-off points on the fuel pumps at service stations • drive time Select this function from the INFO menu to display a timer. To operate the Trip Elapsed Drive Time perform the following: 1. Press and release RESET in order to start the timer. 112 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 113
electrical accessories (heater / air conditioning, wipers, etc.) and make sure all vehicle doors are shut. 1. Turn ignition to the ON position. 2. Start the engine. 3 2 1 15 3. Determine your magnetic zone by referring to the zone map. 4 14 13 5 12 6 7 8 9 1011 113 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 114
calibration, turn off all electrical accessories (heater / air conditioning, wipers, etc.) and make sure all vehicle doors are shut. 1. Turn ignition to the ON position. 2. Start the engine. 3. Press the SETUP button repeatedly until the message center displays "RESET FOR CALIBRATION". 4. Press - 2008 Mercury Sable | Owner's Manual - Page 115
SYSTEM 3. WASHER FLUID LEVEL 4. DOORS CLOSED 5. TRUNK CLOSED 6. BRAKE SYSTEM 7. TIRE PRESSURE MONITORING SYSTEM 8. DISTANCE TO EMPTY Oil life An oil change is required whenever indicated by the message center. USE ONLY RECOMMENDED ENGINE OILS. 115 2008 Sable (mgo) Owners Guide (post-2002-fmt - 2008 Mercury Sable | Owner's Manual - Page 116
. 2. Pressing the RESET control cycles the message center through each of the language choices. 3. Press and change from English to Metric. Autolamp delay (if equipped) This feature keeps your headlights on for up to three minutes after the ignition is switched off. 116 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 117
30, 60, 90, 120 or 180 seconds. Autolock (if equipped) This feature automatically locks all vehicle doors when the vehicle is shifted into any gear, putting the to possible problems or malfunctions in your vehicle's operating systems. 117 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 118
the message center after you Check charging system Check brake system Brake fluid level low Park brake engaged Low tire pressure Tire pressure monitor fault Tire pressure sensor fault Trunk ajar Washer fluid level low Change oil soon Oil change 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 119
engine is operating at normal speeds, have the electrical system checked as soon as possible. CHECK BRAKE SYSTEM. Displayed when the brake system needs servicing. If the warning stays on or continues to come on, contact your authorized dealer as soon as possible. LOW BRAKE FLUID. Indicates the brake - 2008 Mercury Sable | Owner's Manual - Page 120
left reaches 0%, the OIL CHANGE REQUIRED message will be displayed. INTERIOR TRUNK CONTROL Press the remote trunk release control on the instrument panel to the left of the steering wheel. Rear sunshade (if equipped) Your vehicle may be equipped with a rear sunshade that covers the rear window of - 2008 Mercury Sable | Owner's Manual - Page 121
anchors provided. Do not put more than 50 lb. (22 kg) in the net. This net is not designed to restrain objects during a collision. 121 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 122
a spare key with you in case of an emergency. For more information regarding programming replacement IKTs, refer to the SecuriLock™ passive anti-theft system section later in this chapter. when starting and turning off your vehicle. 122 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 123
center thumb rest of the IKT and forefinger on the logo badge on the opposite side. To gain more leverage when rotating the IKT in the ignition lock cylinder, you can readjust the location doors. control to unlock all control to lock all 123 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 124
all the doors will lock, then all doors will automatically unlock reminding you that your key is still in center. Refer to Message center in the Driver Controls chapter. Note: The autolock feature can be activated/deactivated independently of the autounlock feature. 124 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 125
Security Power door lock switch autolock enable/disable procedure ignition to the 1 (LOCK) position. 2. Close all the doors. 3. Enter factory-set 5-digit entry code. 4. Press and hold the 3 • 4. While holding the 3 • 4 press the 7 • 8. . 125 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 126
to Message center in the Driver Controls chapter. Note: The autounlock feature can be activated/deactivated independently of the autolock feature. Power door lock switch autounlock enable programming mode has been entered and is active. 126 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 127
all the doors. 3. Enter factory-set 5-digit entry code. 4. Press and hold the 3 • 4. While holding located on rear edge of each rear door and must be set separately for each door. Setting the lock for one door will not automatically set the lock for both doors. 127 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 128
material that will glow for hours in darkness following brief exposure to ambient light. The "T" shaped handle will be located either on the luggage compartment door (lid) or inside the luggage should be taught not to play in vehicles. 128 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 129
ENTRY SYSTEM The Integrated Keyhead Transmitter (IKT) complies with part 15 of the FCC rules and with RSS-210 of Industry including interference that may cause undesired operation. Changes or modifications not expressly approved by the . 129 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 130
aid in troubleshooting the problem. Unlocking lights will not turn off if: • they have been turned on using the dimmer control or • any door is open. The battery will not flash. Car finder Press twice method be used to locate your vehicle, rather 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 131
. • Ensure that the trunk is closed and latched before driving your vehicle. Failure to properly latch the trunk may cause to recall the memory seat/mirror feature. Press to automatically move the seat/mirrors to the desired memory position. 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 132
Insert the new battery. Refer to the instructions inside the IKT for the correct orientation of the battery. Press the battery down to ensure that the battery is fully seated in the battery housing cavity. 5. Snap the battery cover back onto the key. Note: Replacement of the battery will not cause - 2008 Mercury Sable | Owner's Manual - Page 133
or • after 25 seconds of illumination. The inside lights will not turn off if: • they have been • Tail lamps The lamps will automatically turn off: • if the ignition switch is turned to the 3 ( having your vehicle serviced by your authorized 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 134
the perimeter lighting feature has battery saver will shut off them off 10 minutes after the ignition has been turned to the 1 (LOCK) position. • The battery saver will shut off the headlamps 10 minutes after the ignition has been turned to the 1 (LOCK) position. 134 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 135
operated with the factory set 5-digit entry code; this code is located on the owner's wallet card in the code cannot be associated with a memory setting. 5. The doors will lock then unlock to confirm that your personal keycode has been programmed to the module. 135 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 136
, enter the factory set code or your personal code, then press the 3 • 4 control within five seconds. To lock all doors, press the 7 • 8 and the 9 • 0 at the same time (with the driver's door closed). You do not need to enter the keypad code first. 136 2008 Sable (mgo) Owners Guide (post-2002-fmt - 2008 Mercury Sable | Owner's Manual - Page 137
. If a problem occurs with the SecuriLock™ system, the indicator will flash rapidly or glow steadily when the ignition is in the 3 (RUN) position. If this occurs, the vehicle will not start and should be taken to an authorized dealer for service. 137 2008 Sable (mgo) Owners Guide (post-2002 - 2008 Mercury Sable | Owner's Manual - Page 138
program both the engine immobilizer keycode and the remote entry transmitter portion of the IKT to your vehicle. Note: A maximum of eight coded keys can be programmed to your vehicle; only four of these eight can be IKTs with remote entry functionality. 138 2008 Sable (mgo) Owners Guide (post-2002 - 2008 Mercury Sable | Owner's Manual - Page 139
first previously programmed coded key into the engine and will operate the remote entry system (if the new key is an Integrated Keyhead Transmitter). The theft indicator light will illuminate for three seconds and then go out to indicate successful programming. 139 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 140
your vehicle's engine and/or will not operate the remote entry features. The theft indicator light may flash on problem with your vehicle, ensure ALL Integrated Keyhead Transmitters are brought to the authorized dealer to aid in troubleshooting 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 141
or the remote entry transmitter portion of your IKT. • The ignition is turned to the 3 (ON) position with an invalid SecuriLock™ key or IKT. 141 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 142
To minimize the risk of neck injury in the event of a crash, the driver and passenger occupants should not sit in and/or operate located directly or as close as possible behind your head. The head restraints can be moved up by pulling up on the head restraint. 142 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 143
and move the head restraint fully down. 3. Pull the strap located on the back of the seat to fold the front passenger seatback. 4. Without releasing the pull strap, push the seatback forward. 5. Move the seat as far forward as possible. 143 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 144
Restraints Cover sharp manual seat (if equipped) Never adjust the driver's seat or seatback when the vehicle is moving. Always drive and ride with your seatback upright and the lap belt snug and low across the hips. Lift handle to move seat forward or backward. 144 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 145
or sudden stop. Always drive and ride with your seatback weight from the seat cushion and affect the decision of the passenger sensing system, resulting in serious injury or death in a crash. Always sit upright against your seatback, with your feet on the floor. 145 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 146
is located on the outboard side of the seat cushion. Press the front or rear portion to tilt the seat. • Driver Press the control to move the seat forward, backward, up or down. • Driver Press the control to move the seat forward, or backward. • Passenger 146 2008 Sable (mgo) Owners Guide (post - 2008 Mercury Sable | Owner's Manual - Page 147
. To operate the heated seats: • Push the control located on the climate control system panel once to activate high heat. light on the control will illuminate when activated. For low heat, one light will be lit; for high heat, both lights will be lit. 147 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 148
automatic positioning of the driver seat, power mirrors, and adjustable pedals to two programmable positions. The memory seat control is located valid personal entry code that is located directly or as close as possible behind your head. 148 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA ( - 2008 Mercury Sable | Owner's Manual - Page 149
One or both rear seatbacks can be folded down to provide additional cargo space. To lower the seatback(s) from inside the vehicle, pull the strap located on the outboard side of the seatback to release it, and then fold seatback down. When raising the seatback(s), make sure you hear the seat - 2008 Mercury Sable | Owner's Manual - Page 150
crash situations. Your vehicle's Personal Safety System™ consists of: • Driver and passenger dual-stage airbag supplemental restraints. • Front outboard safety belts with pretensioners, energy management retractors (first row only), and safety belt usage sensors. 150 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 151
light and back-up tone. The electrical wiring for the airbags, crash stage airbag supplemental restraints based on crash severity and occupant crash event on the severity of the impact. This allows your Personal Safety System™ to distinguish between different 151 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 152
they move forward during pre-crash braking. The most effective way to child seat in front of an active air bag. If you must use a The front passenger sensing system can automatically turn off the passenger front airbag seat is empty to prevent unnecessary replacement of airbag(s) after a collision. - 2008 Mercury Sable | Owner's Manual - Page 153
body crash problem and warning light are repaired. If any of these things happen, even intermittently, have the Personal Safety System™ serviced at an authorized dealer immediately. Unless serviced, the system may not function properly in the event of a collision. 153 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 154
drive always properly wear their safety belts, even when an air bag supplemental restraint system (SRS) is provided. It is seat and using a safety belt properly. In a rollover crash, an unbelted person is significantly more likely to die than a 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 155
the combination lap/shoulder belt adjusts to your movement. However, if you brake hard, turn hard, or if your vehicle receives an impact of 5 replace if necessary the Belt and Retractor assembly after an accident could increase the risk of injury in a collision. 155 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 156
and locking in response to vehicle movement. For example, if the driver brakes suddenly or turns a corner sharply, or the vehicle receives an impact of to use the automatic locking mode • Buckle the combination lap and shoulder belt. 156 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus - 2008 Mercury Sable | Owner's Manual - Page 157
a clicking sound. This indicates the safety belt is now in the automatic locking mode. How to disengage the automatic locking mode Ford Motor Company recommends that all passenger safety belt assemblies and make sure it is locked in place. 157 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 158
added (part number 611C22 is located at the to change the support assemblies (slide bar-if equipped), shoulder belt height adjusters (if equipped), shoulder belt guide on seatback (if equipped), child safety seat LATCH and tether anchors, and attaching 158 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 159
buckled before the ignition switch is turned to the ON position...The driver's safety belt is buckled while the indicator light is illuminated and the warning light in the instrument cluster when the driver's and front passenger's safety belt is unbuckled. 159 2008 Sable (mgo) Owners Guide (post - 2008 Mercury Sable | Owner's Manual - Page 160
km/h) and 1-2 minutes have elapsed since the ignition switch has been turned to ON...The driver's or front light illuminates and the warning chime sounds for 6 seconds every 30 seconds, repeating for approximately 5 minutes or until the safety belts are buckled. 160 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 161
in rear and side crashes or rollovers. "I'd rather be Not a good idea. People who are ejected are 40 thrown clear" times more likely to DIE. Safety belts help prevent ejection, WE CAN'T "PICK OUR CRASH". 161 Reasons given..."Crashes are rare events" 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA - 2008 Mercury Sable | Owner's Manual - Page 162
affect the performance of the vehicle's air bag system. One time disable brake is set • The gearshift is in P (Park) (automatic transmission) • The ignition switch driving the vehicle. 1. Turn the ignition switch to the RUN (or ON) position. DO NOT START THE ENGINE. 162 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 163
belt warning light flashing four times per second for three seconds again. AIRBAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS) The airbag supplemental restraint system (SRS) is designed to work in conjunction with the safety belts to help protect the driver and front 163 2008 Sable (mgo) Owners Guide (post - 2008 Mercury Sable | Owner's Manual - Page 164
body airbags do not offer any protection in crashes for which they do not deploy. is greatest close to the trim covering the airbag module. All occupants of their safety belts, even when an air bag supplemental restraint system (SRS) is 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 165
service, repair, or modify the airbag supplemental restraint system (SRS) or its fuses. See your authorized dealer. Modifying or adding equipment to the front end of the vehicle (including frame, bumper, front end body all the way back. 165 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 166
deployment. Thus, it is extremely important that occupants be properly restrained as far away from the airbag module as possible while maintaining vehicle control. 166 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 167
air bag has deployed, the air bag will not function again and must be replaced immediately. If the air bag is not replaced the airbag system readiness light, the airbag back up system works with sensors that are part of the front passenger's seat 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 168
instructions, • the system determines that a small child is present in a booster seat, • a front passenger takes his/her weight airbag is disabled. The indicator lamp is located above the glove box on the instrument panel instructions. 168 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 169
in the seat, centered on the seat Indicator Light Unlit crash event. For example, if an occupant slouches, lies down, turns sideways, sits forward, leans forward or sideways, or puts one or both feet up, the chance of injury during a crash is greatly increased. 169 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 170
weight from the seat cushion and affect the decision of the front passenger sensing system, resulting in serious injury or death in a crash Indicator Light Unlit check for the following: • Objects lodged underneath the seat • Objects between the seat cushion and the center console cause the weight of - 2008 Mercury Sable | Owner's Manual - Page 171
between the seat and the center console (if equipped). Check the "passenger airbag off" or "pass airbag off" indicator lamp for proper airbag Status. Failure to follow these instructions may interfere with the front passenger seat sensing system. In case there is a problem with the front passenger - 2008 Mercury Sable | Owner's Manual - Page 172
be heard. The tone pattern will repeat periodically until the problem and/or light are repaired. If any of these things happen, even intermittently, have the supplemental restraint system serviced at an authorized dealer immediately. Unless serviced, the system may not function properly in the event - 2008 Mercury Sable | Owner's Manual - Page 173
service, repair, or modify the airbag SRS, its fuses or the seat cover testing cover designed to allow airbag deployment. • The same warning light, electronic control and diagnostic unit as used for the front airbags. • Crash sensors located 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 174
causes sufficient lateral deceleration. Several air bag system components get hot after inspected and serviced by an authorized dealer. If the airbag is not replaced, the unrepaired instructions may increase the risk of personal injury in the event of a collision. 174 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 175
injure you as it deploys from the headliner. Do not attempt to service, repair, or modify the Safety Canopy™ system, its fuses, the A, B, of the Safety Canopy™ system included recommended testing procedures that were developed by a group of 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 176
airbag light, electronic control and diagnostic unit as used for the front airbags. • Two crash sensors mounted on the B pillar (one on each side of the vehicle). • Two crash sensors located at the Do not touch them after inflation. 176 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 177
the problem and light are repaired. If any of these things happen, even intermittently, have the SRS serviced at your an authorized dealer immediately. Unless serviced, the in this chapter for special instructions about using airbags. 177 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 178
are eight years old. Check your local and state injury in a collision. Always follow the instructions and warnings that come with any infant or belt. Moving the child closer to the center of the vehicle may help provide a good crash. 178 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 179
with knees bent comfortably at the edge of the seat without slouching? • Does the lap belt rest low across the hips? • Is the shoulder belt centered on the shoulder and chest? • Can the child stay seated like this for the whole trip? 179 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 180
find a seating position that adequately supports your child's head, a high back booster seat would be a better choice. Either type can be used at any seating position equipped with lap/shoulder belts if your child is over 40 lb. (18 kg). 180 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus - 2008 Mercury Sable | Owner's Manual - Page 181
all instructions provided by the manufacturer of the booster seat. Never put the shoulder belt under a child's arm or behind the back because it eliminates the protection for the upper part of the body and may increase the risk of injury or death in a collision. 181 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 182
for the size and weight of the child. Carefully follow all of the manufacturer's instructions with the safety seat . • Put the safety belt in the automatic locking mode. Refer to Automatic locking mode. • LATCH lower anchors are recommended 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 183
and Tethers for Children) attachments in this chapter. Carefully follow all of the manufacturer's instructions included with the safety seat you put in your vehicle. If you do not install a seat with a combination lap and shoulder belt. 183 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 184
portions together, route the tongue through the child seat according to the child seat manufacturer's instructions. Be sure the belt webbing is not twisted. 4. Insert the belt tongue into the tongue is latched securely by pulling on it. 184 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 185
the retractor is in the automatic locking mode (you should not be able to pull more belt out). If the retractor is not locked, unbuckle the belt and repeat Steps 2 through 9. Check to make sure the child seat is properly secured before each use. 185 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA - 2008 Mercury Sable | Owner's Manual - Page 186
are equipped with built-in tether strap anchors located behind the seats as described below. The tether anchors in your vehicle are located under a cover marked with the tether anchor symbol (shown with strap over the top of the seatback. 186 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 187
belts. Follow the instructions in this chapter. 7. Tighten the child safety seat tether strap according to the manufacturer's instructions. If the safety seat is not anchored properly, the risk of a child being injured in a collision greatly increases. 187 2008 Sable (mgo) Owners Guide (post-2002 - 2008 Mercury Sable | Owner's Manual - Page 188
safety seats are installed, use the LATCH lower anchors for the center child safety seat; however, you must use child safety seats crash, one anchor may not be strong enough to hold two child safety seat attachments and may break, causing serious injury or death. 188 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 189
below the locator symbols on the seat back. Follow the child seat manufacturer's instructions to Check to see if the anchors hold the seat in place. If the safety seat is not anchored properly, the risk of a child being injured in a crash greatly increases. 189 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 190
are AA, A, B, and C. The grades represent the tire's ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance. 190 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 191
Wheels and Loading The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration of miles of service, but they must code. • Inflation pressure: A measure of the amount of air 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 192
when mounted on the vehicle. Rim: The metal support (wheel) for a tire or a tire and tube assembly air pressure without appearing flat. Every day before you drive, check your tires. If one looks lower than the others, use a tire gauge to check 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 193
never "bleed" or reduce air pressure. The tires are hot from driving and it is normal for pressures to increase above recommended cold pressures. A hot tire at or below recommended cold inflation pressure could be significantly under-inflated. 193 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA - 2008 Mercury Sable | Owner's Manual - Page 194
is suspected, have the tire demounted and inspected in case it needs to be repaired or replaced. For your safety, tires that are damaged or show signs of excessive wear should not be used because they are more likely to blow out or fail. 194 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 195
high loading conditions can accelerate the aging process and may require tires to be replaced more frequently. You should replace your spare tire when you replace the road tires or after six years due to aging even if it has not been used. 195 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA - 2008 Mercury Sable | Owner's Manual - Page 196
the plant code designating where it was manufactured, the next two are the tire size code and the wheels could cause steering, suspension, axle or transfer case/power transfer unit failure. If you have questions regarding tire replacement, see an authorized dealer. 196 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 197
a Ford Dealer or other tire service professional should do the mounting. Always inflate steel carcass tires with a remote air fill with the person inflating standing at a minimum of 12 ft. (366 cm) away from the tire wheel assembly. Important: Remember to replace the wheel valve stems when the road - 2008 Mercury Sable | Owner's Manual - Page 198
or damaged, deflate it, remove wheel and replace it with your spare tire and wheel. If you cannot detect a cause, have the vehicle towed to the nearest repair facility or tire dealer to have the vehicle inspected. Tire and wheel alignment A bad jolt from hitting a curb or pothole can cause the front - 2008 Mercury Sable | Owner's Manual - Page 199
Tires, Wheels and Loading • Front Wheel Drive (FWD) vehicles (front tires at top of diagram) • Rear Wheel Drive (RWD) vehicles/Four Wheel Drive (4WD)/ All Wheel Drive (AWD) vehicles (front tires at top of diagram) 199 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 200
dealer to check for and correct any wheel misalignment, tire imbalance or mechanical problem involved before Rim Association (T&RA), that may be used for service on cars, SUVs, minivans and light trucks. Note: If your tire size does not 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 201
in inches. If you change your wheel size, you will have to purchase new tires to match the new wheel diameter. 6. 95: Indicates the tire's load index. It is an index that relates to how much weight a tire can carry. You may find this information in your Owner's Guide. If not, contact a local - 2008 Mercury Sable | Owner's Manual - Page 202
2001. The numbers in between are identification codes used for traceability. This information is used Certification Label, which is located on the B-Pillar or the tested under controlled conditions on a specified indoor laboratory test wheel 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 203
Wheels and Loading Label or Tire Label which is located on , designated by the Tire and Rim Association (T&RA), that is intended for service on light trucks. 2. Load Range/Load Inflation Limits: Indicates the tire's load-carrying axle. 203 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 204
that is intended for temporary service on cars, SUVs, minivans and light trucks. 2. 145: Indicates located on the B-Pillar or the edge of the driver's door. Refer to the payload description and graphic in the Vehicle loading - with and without a trailer section. 204 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 205
to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly. The Tire Pressure Monitoring System complies with part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the 205 2008 Sable (mgo) Owners Guide (post-2002-fmt - 2008 Mercury Sable | Owner's Manual - Page 206
and need to be inflated to the manufacturer's recommended tire pressure. Even if the light turns ON and a short time later turns OFF, your tire pressure still needs to be checked. Visit www.checkmytires.org for additional information. 206 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 207
is to warn you when your tires need air. It can also warn you in the event the system is no longer capable of functioning as intended. Please refer to the following chart for information concerning your Tire Pressure Monitoring System: 207 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 208
the Tire Label (located on the edge of driver's door or the B-Pillar), the vehicle must be driven for at least two minutes over 20 mph (32 km/h) before the light will turn OFF. Spare tire in use Your temporary spare tire is in use. Repair the damaged road wheel/tire and reinstall it - 2008 Mercury Sable | Owner's Manual - Page 209
Monitoring System may not respond immediately to the air added to your tires. It may take up to two minutes of driving over 20 mph (32 km/h) for the light to turn OFF after you have filled your tires to the recommended inflation pressure. 209 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 210
the low tire pressure warning light is ON, visually check each tire to verify that no tire is flat. (If one or more tires are flat, repair as necessary.) Check air pressure in the road tires. If any tire is under-inflated, carefully drive the vehicle to the nearest location where air can be added to - 2008 Mercury Sable | Owner's Manual - Page 211
of fuel and all standard equipment. It does not include passengers, cargo, or optional equipment. Vehicle Curb Weight - is the weight of your new vehicle when you picked it up from your authorized dealer plus any aftermarket equipment. 211 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 212
Tires, Wheels and Loading Payload - is the combined weight of by the assembly plant. If any aftermarket or authorized-dealer installed equipment has been installed on the vehicle, the weight of the equipment must be subtracted from . 212 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 213
the Base Curb Weight, including cargo and optional equipment. When towing, trailer tongue load weight is also part of cargo weight. GAW (Gross Axle Weight) - is the total weight placed on each axle (front and rear) - including vehicle curb weight and all payload. 213 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 214
Safety Compliance Certification Label vehicle weight rating limits could result in substandard vehicle handling or performance, engine, transmission and/or structural damage, serious damage to the vehicle, loss of control and personal injury. 214 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA - 2008 Mercury Sable | Owner's Manual - Page 215
in serious damage to the vehicle and/or personal injury. Steps for determining the correct load limit: 1. Locate the statement "The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs." on your vehicle's placard. 215 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 216
be: 635 kg - (2 x 99 kg) - (12 x 45 kg) = 635 - 198 540 = -103 kg. You will need to reduce the load weight by at least 240 lb. (104 kg). If you remove 3-100 lb. (45 kg) cement bags, then the load calculation would be: 216 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 217
engine, transmission, brakes, tires and suspension. Inspect these components carefully after towing. Do not exceed the GVWR or the GAWR specified on the certification label. Towing trailers beyond the maximum recommended gross trailer weight 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 218
Tires, Wheels and Loading If you use a rental trailer, follow the instructions that the rental agency gives to you. Do not attach safety chains to the bumper. Trailer brakes Electric brakes and manual, automatic or surge-type trailer brakes are safe if installed properly and adjusted to the - 2008 Mercury Sable | Owner's Manual - Page 219
Wheel Drive vehicle with the front wheels off the ground (by using a tow dolly) and the rear wheels on the ground. This will cause damage to your AWD system. If you are using a vehicle transport trailer, follow the instruction specified by the equipment provider. 219 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 220
(refer to Starting in the Driving chapter). The ACC position also unlocks the steering wheel. • Do not exceed 65 mph (105 km/h) • Start the engine and allow it to run for five minutes at the beginning of each day and at each fuel stop. 220 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus - 2008 Mercury Sable | Owner's Manual - Page 221
Driving STARTING Positions of the ignition 1. LOCK, locks the automatic transaxle gearshift lever and allows key removal. This position also shuts the engine and all electrical accessories off without locking the steering wheel. To lock the steering wheel, remove the key then turn the steering wheel - 2008 Mercury Sable | Owner's Manual - Page 222
than normal in order to warm the engine. If the engine idle speed does not slow down automatically, have the vehicle checked. Before starting the vehicle: 1. 2. Make sure vehicle accessories are off. • Make sure the parking brake is set. 222 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 223
the key to LOCK, wait 10 seconds and try again. If the engine still fails to start, press the accelerator to the floor and try again; this will allow the engine to crank with the fuel shut off in case the engine is flooded with fuel. 223 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 224
drive if you smell exhaust fumes. Important ventilating information If the engine air conditioning to bring in fresh air. ENGINE BLOCK HEATER (IF EQUIPPED) An engine block heater warms the engine follow engine block heater instructions could 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 225
Driving with Outdoor Appliances. Never • Finally, have the engine block heater system checked during your fall tune-up to be sure it's in good working order. How to use the engine block heater Ensure the use additional electricity. 225 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 226
The ABS lamp in the instrument cluster momentarily illuminates ABS when the ignition is turned on. If the light does not illuminate during start up, remains on or flashes, the ABS is disabled due to a malfunction and needs to be serviced. 226 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 227
normal brakes fail, the parking brake can be used to stop your vehicle in an emergency. Since the parking brake applies only the rear brakes, the vehicle's stopping distance will increase greatly and the handling of your vehicle will be adversely affected. 227 2008 Sable (mgo) Owners Guide (post - 2008 Mercury Sable | Owner's Manual - Page 228
Accelerating on a slippery surface • Taking a turn too fast • Maneuvering quickly to avoid an accident, pedestrian or obstacle • Hitting a patch of ice • Changing lanes on a snow-rutted road • Entering a snow-free road from a snow-covered side street, or vice versa 228 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 229
check. During AdvanceTrac operation you may experience the following: • A rumble or grinding noise • A slight deceleration of the vehicle • The AdvanceTrac indicator light will illuminate • If your foot is on the brake pedal, you will feel a vibration in the pedal. 229 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 230
resulting changes to the vehicle's handling can adversely affect the AdvanceTrac system. Also, do not install a stereo loudspeaker near the front center console or under either front seat. The speaker vibrations can adversely affect the AdvanceTrac sensors located in this area. Aggressive driving in - 2008 Mercury Sable | Owner's Manual - Page 231
from the reservoir. See Checking and adding power steering fluid in the Maintenance and Specifications chapter. If the power steering system breaks down (or if the engine is turned off), you can steer the vehicle manually, but it takes more effort. 231 2008 Sable (mgo) Owners Guide (post-2002-fmt - 2008 Mercury Sable | Owner's Manual - Page 232
Driving If the steering wanders or pulls, check for: an improperly inflated tire uneven tire wear loose or worn suspension components loose or worn steering components improper steering alignment AUTOMATIC TRANSAXLE OPERATION Brake-shift interlock This vehicle is equipped with a brake-shift - 2008 Mercury Sable | Owner's Manual - Page 233
brake is fully released, but the brake warning lamp remains illuminated, the brakes may not be working properly. See your authorized dealer as soon as possible. Automatic the battery is disconnected or a new battery installed, the strategy must be relearned. 233 2008 Sable (mgo) Owners Guide (post - 2008 Mercury Sable | Owner's Manual - Page 234
Driving Understanding the gearshift positions of the 6-speed automatic transaxle P (Park) This position locks the transaxle and prevents the front wheels from turning. To put your vehicle in gear: • Depress the brake pedal • Move the gearshift lever into the desired gear To put your vehicle in P ( - 2008 Mercury Sable | Owner's Manual - Page 235
• Provides additional engine braking through the automatic transmission shift strategy which reacts to vehicle inputs (vehicle acceleration, accelerator pedal, brake pedal and vehicle speed). • Allows the transmission to select gears that will provide the desired engine braking based on the vehicle - 2008 Mercury Sable | Owner's Manual - Page 236
the transmission control switch again. • The O/D OFF lamp in the instrument cluster will not be illuminated. • The transmission will operate in gears one through six. O/D (overdrive mode) is automatically returned each time the key is turned off. L (Low) • Provides maximum engine braking. • Will - 2008 Mercury Sable | Owner's Manual - Page 237
If the sensors are covered, it will affect the accuracy of the RSS. If your vehicle sustains damage to the rear bumper/fascia, leaving it misaligned or bent, the sensing zone may be altered causing inaccurate measurement of obstacles or false alarms. 237 2008 Sable (mgo) Owners Guide (post-2002-fmt - 2008 Mercury Sable | Owner's Manual - Page 238
goes off the edge of the pavement, slow down, but avoid severe brake application, ease the vehicle back onto the pavement only after reducing your speed. Do not turn the steering wheel too sharply while returning to the road surface. 238 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 239
transmission and tires may occur or the engine may overheat. Always set the parking brake driving" your vehicle (i.e., turn the steering wheel only as rapidly and as far as required to avoid the emergency). Excessive steering will result in less vehicle control, 239 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 240
gravel) there will be a change in the way the vehicle responds to a maneuver (steering, acceleration or braking). Again, avoid these abrupt inputs. AWD Systems (if equipped) AWD uses all four wheels to power the vehicle. This increases traction, enabling you to drive over terrain and road conditions - 2008 Mercury Sable | Owner's Manual - Page 241
the accelerator slowly and avoid spinning your wheels. If the vehicle does slide, steer in the direction of the slide until you regain control of the vehicle. If the transmission, AWD system components or axles are submerged in water, their fluids should be checked and changed, if necessary. Driving - 2008 Mercury Sable | Owner's Manual - Page 242
control. Avoid sudden applications of power and quick changes of direction on snow and ice. Apply the accelerator slowly and steadily when starting from a full stop. Avoid sudden braking as well. Although an AWD vehicle may accelerate better than a two-wheel drive vehicle in snow and ice, it won - 2008 Mercury Sable | Owner's Manual - Page 243
the wheel rims (for cars) or the bottom of the hubs (for trucks). When driving through water, traction or brake capability may be limited. Also, water may enter your engine's air intake and severely damage your engine or your vehicle may stall. Driving through deep water where the transmission vent - 2008 Mercury Sable | Owner's Manual - Page 244
. Roadside assistance will cover: • a flat tire change with a good spare (except vehicles that have been supplied with a tire inflation kit) • battery jump start • lock-out assistance (key replacement cost is the customer's responsibility) • fuel delivery - Independent Service Contractors, if not - 2008 Mercury Sable | Owner's Manual - Page 245
35 miles. To obtain reimbursement information, U.S. Ford, Mercury and Lincoln vehicle customers call 1-800-241-3673. Customers assistance coverage beyond this period through the Ford Auto Club by contacting your authorized dealer or by 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 246
the ignition OFF. 2. Check the fuel system for leaks. 3. If no leaks are apparent, reset the switch by pushing in on the reset button. 4. Turn the ignition ON. 5. Wait a few seconds and return the key to OFF. 6. Make another check for leaks. 246 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA - 2008 Mercury Sable | Owner's Manual - Page 247
fuses Grey Violet Pink Tan Brown Red Blue Yellow Natural Green Maxi fuses Yellow - Green Orange Red Blue Tan Natural Cartridge Fuse link maxi cartridge fuses Blue Blue - - Pink Pink Green Green Red Red Yellow Yellow - Brown Black Black 247 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus - 2008 Mercury Sable | Owner's Manual - Page 248
panel to the left of the steering wheel. The fuses are coded as follows. Fuse/Relay Location 1 2 3 Fuse Amp Rating 30A 15A 15A Passenger Compartment Fuse Panel Description Smart window motor Brake on/off switch, High-mounted brake lamp SDARS, Bluetooth, Family entertainment system (FES)/Rear seat - 2008 Mercury Sable | Owner's Manual - Page 249
Adjustable pedal switch Radio, Radio start signal Instrument panel cluster Overdrive cancel switch Compass, Automatic dimming rear view mirror Restraint control module Spare AWD module Steering rotation sensor, FEPS, Rear park assist, Heated seat modules 249 2008 Sable (mgo) Owners Guide (post-2002 - 2008 Mercury Sable | Owner's Manual - Page 250
shock, always replace the cover to the Power Distribution Box before reconnecting the battery or refilling fluid reservoirs. If the battery has been disconnected and reconnected, refer to the Battery section of the Maintenance and Specifications chapter. 250 2008 Sable (mgo) Owners Guide (post-2002 - 2008 Mercury Sable | Owner's Manual - Page 251
Front wipers Not used Spare Not used Engine cooling fan Not used Anti-lock Brake System (ABS)/AdvanceTrac pump Starter Powertrain Control Module (PCM) relay ABS/AdvanceTrac valve Power point (instrument panel) Power point (2nd row) Spare 251 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 252
Location Power Distribution Box Description Power point (console) Alternator Not used Not used Rear defroster switch (to SJB) Not used Front A/C blower motor One-touch start Fuel pump IVD, Yaw rate sensor Fuel diode, PCM Not used A/C clutch Fuel pump Backup Not used 252 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 253
the TPMS sensor, refer to Changing tires with TPMS in the Tires, Wheels and Loading chapter. Replace the spare tire with a road tire as soon as possible. The use of tire sealants may damage your Tire Pressure Monitoring System and should not be used. 253 2008 Sable (mgo) Owners Guide (post-2002-fmt - 2008 Mercury Sable | Owner's Manual - Page 254
• Use commercial car washing equipment • Try to repair the dissimilar spare tire Use of one of the dissimilar spare tires listed above at any one wheel location can lead to impairment of the following: • Handling, stability and braking performance 254 2008 Sable (mgo) Owners Guide (post-2002-fmt - 2008 Mercury Sable | Owner's Manual - Page 255
be given to: • Towing a trailer • Driving vehicles equipped with a camper body • Driving vehicles with a load on the cargo rack Drive cautiously when using a full-size dissimilar spare tire/wheel and seek service as soon as possible. 255 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 256
loosen the lug nuts and to operate the jack. Tire change procedure When one of the front wheels is off the ground, the transaxle alone will not prevent the vehicle from moving or slipping off the jack, even if the vehicle is in P (Park). 256 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 257
the jack or changing the wheel. 1. Block the diagonally opposite wheel. 2. Remove wheel cover (if equipped) with the lug wrench tip and loosen each wheel lug nut one-half turn counterclockwise but do not remove them until the wheel is raised off the ground. 257 2008 Sable (mgo) Owners Guide (post - 2008 Mercury Sable | Owner's Manual - Page 258
specifications later in this chapter 3 4 for the proper lug nut torque specification. 8. Install the wheel cover (if equipped). The wheel cover will 5 2 only install if the Ford/Mercury logo is aligned over the valve stem on the wheel. 258 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 259
holes in the jack base can be placed on the locating tabs of the jack mounting bracket in the spare tire tub. 2. Securely close the wrench compartment and the jack bag using the VELCRO strips. 3. Place the jack kit on the angled bracket in the spare tire tub, using the locating tabs to position - 2008 Mercury Sable | Owner's Manual - Page 260
recommended replacement fasteners. When a wheel is installed, always remove any corrosion, dirt or foreign materials present on the mounting surfaces of the wheel or the surface of the wheel hub, brake drum or brake disc that contacts the wheel. Ensure that any fasteners that attach the rotor to - 2008 Mercury Sable | Owner's Manual - Page 261
's electrical system. 3. Park the booster vehicle close to the hood of the disabled vehicle making sure the two vehicles do not touch. Set the parking brake on both vehicles and stay clear of the engine cooling fan and other moving parts. 261 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 262
Roadside Emergencies 4. Check all battery terminals and remove any excessive corrosion before you attach the battery cables. Ensure that vent caps are tight and level. 5. Turn the heater fan on in both vehicles to protect from any electrical surges. Turn all other accessories off. Connecting the - 2008 Mercury Sable | Owner's Manual - Page 263
of fan blades, belts, moving parts of both engines, or any fuel delivery system parts. Jump starting 1. Start the engine of the booster vehicle and run the engine at moderately increased speed. 2. Start the engine of the disabled vehicle. 263 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus - 2008 Mercury Sable | Owner's Manual - Page 264
disabled vehicle has been started, run both engines for an additional three minutes before disconnecting designate the assisting (boosting) battery. 2. Remove the jumper cable on the negative (-) connection of the booster vehicle's battery. 264 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA - 2008 Mercury Sable | Owner's Manual - Page 265
cable from the positive (+) terminal of the disabled vehicle's battery. After the disabled vehicle has been started and the jumper cables removed, allow it to idle for several minutes so the engine computer can relearn its idle conditions. 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus - 2008 Mercury Sable | Owner's Manual - Page 266
damage to the automatic transaxle. On AWD vehicles, it is required that your vehicle be towed with a wheel lift and dollies or flatbed equipment with all the wheels off the ground to prevent damage to the automatic transaxle, AWD system or vehicle. 266 2008 Sable (mgo) Owners Guide (post-2002-fmt - 2008 Mercury Sable | Owner's Manual - Page 267
speed is not to exceed 35 mph (56 km/h). Ford Motor Company produces a towing manual for all authorized tow truck operators. Have your tow truck operator refer to this manual for proper hook-up and towing procedures for your vehicle. 267 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 268
dealer. Repairs will be made using Ford or Motorcraft parts, or remanufactured or other parts that are authorized by Ford. If you have questions or concerns, or are unsatisfied with the service you are receiving, follow these steps: 1. Contact your Sales Representative or Service Advisor at - 2008 Mercury Sable | Owner's Manual - Page 269
when your vehicle needs service, or if you need Customer Relationship Center P.O. the authorized dealer is located • The year and complaint involving a warranty dispute, you may wish to contact the Better Business Bureau (BBB) AUTO LINE program (U.S. only). 269 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 270
replacement vehicle. California Civil Code Section 3. The vehicle is out of service for repair of nonconformities for a total of repair of the nonconformity at the following address: Ford Motor Company 16800 Executive Plaza Drive Mail Drop 3NE-B Dearborn, MI 48126 270 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 271
Wilson Boulevard, Suite 800 Arlington, Virginia 22203-1833 Note: Ford Motor Company reserves the right to change eligibility limitations, modify procedures, or to discontinue this process at any time without notice and without obligation. 271 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 272
Extended Service Plan (Ford ESP) coverage. It provides the following: • Benefits during the warranty period depending on the plan you purchase (such as: reimbursement for rentals; coverage for certain maintenance and wear items). • Protection against covered repair costs after your Bumper-to-Bumper - 2008 Mercury Sable | Owner's Manual - Page 273
is subject to change, please ask your authorized dealer for complete details about Ford Extended Service Plan coverage options your emission control system and may cause engine knocking or serious engine damage. Ford Motor Company/Ford of Canada 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 274
complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or Ford Motor Company. 274 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 275
. REPORTING SAFETY DEFECTS (CANADA ONLY) If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform Transport Canada, using their toll-free number: 1-800-333-0510. 275 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 276
as they can scratch the chrome surface. • After polishing chrome bumpers, apply a coating of Motorcraft Premium Liquid Wax (ZC-53-A), available from your authorized dealer, or an equivalent quality product to help protect from environmental effects. 276 2008 Sable (mgo) Owners Guide (post-2002-fmt - 2008 Mercury Sable | Owner's Manual - Page 277
covers. • Some automatic car washes may cause damage to the finish on your wheel rims or covers. Chemical-strength cleaners, or cleaning chemicals, in combination with brush agitation to remove brake dust and dirt, could wear away the clearcoat finish over time. • Do not use hydrofluoric acid-based - 2008 Mercury Sable | Owner's Manual - Page 278
while it is running; water in the running engine may cause internal damage. 3.5L ENGINE PLASTIC (NON-PAINTED) EXTERIOR PARTS Use only approved products to clean plastic parts. These products are available from your authorized dealer. 278 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 279
fluid car wash facilities. Be sure to replace wiper blades when they appear worn or do not function properly. • Do not use abrasives, as they may cause scratches. • Do not use fuel, kerosene, or paint thinner to clean any parts 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 280
white cotton cloth; you may also use Motorcraft Dash & Vinyl Cleaner (ZC-38-A) on the instrument detergents when cleaning the steering wheel or instrument panel to avoid light stains and soil with Motorcraft Professional Strength Carpet & Upholstery Cleaner (ZC-54). 280 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 281
oil/petroleum-based leather conditioners. These products may cause premature wearing of the clear, protective coating. Note: In some instances, color or dye of your vehicle frequently. Keep body and door drain holes free from packed dirt. 281 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus - 2008 Mercury Sable | Owner's Manual - Page 282
-13) Motorcraft Ultra-Clear Spray Glass Cleaner (ZC-23) Motorcraft Vinyl Cleaner (Canada only) (CXC-93) Motorcraft Wash and Wax (Canada only) (CXC-95) Motorcraft Wheel and Tire Cleaner (ZC-37-A) 282 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 283
on 1. Set the parking brake and shift to P (Park). 2. Block the wheels. To reduce the risk of vehicle damage and/or personal burn injuries, do not start your engine with the air cleaner removed and do not remove it while the engine is running. 283 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA - 2008 Mercury Sable | Owner's Manual - Page 284
the bottom of the instrument panel near the steering column. 2. Go to the front of the vehicle and release the auxiliary latch that is located under the front center of the hood. 3. Lift the hood until the lift cylinders hold it open. 284 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 285
steering fluid reservoir 2. Engine coolant reservoir 3. Brake fluid reservoir 4. Battery 5. Power distribution box 6. Air filter assembly 7. Automatic transmission fluid dipstick 8. Engine oil dipstick 9. Engine oil filler cap 10. Windshield washer fluid reservoir 285 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 286
result in impaired windshield vision and increase the risk of injury or accident. Note: Do not put washer fluid in the engine coolant reservoir. Washer fluid placed in the cooling system may harm engine and cooling system components. 286 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 287
is on level ground. 2. Turn the engine off and wait a few minutes for the oil to drain into the oil pan. 3. Set the parking brake and ensure the gearshift is securely latched in P (Park). 4. Open the hood. Protect yourself from engine heat. 287 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus - 2008 Mercury Sable | Owner's Manual - Page 288
is acceptable. DO NOT ADD OIL. • If the oil level is below this mark, engine oil must be added to raise the level within the normal operating range. • If required, add engine oil to the engine. Refer to Adding engine oil in this chapter. 288 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 289
oil filler cap removed. Engine oil and filter recommendations Look for this certification trademark. Use SAE 5W-20 engine oil Only use oils "Certified For Gasoline Engines" by the American Petroleum Institute (API). An oil with this trademark symbol conforms 289 2008 Sable (mgo) Owners Guide (post - 2008 Mercury Sable | Owner's Manual - Page 290
is not covered by Ford warranty. Change your engine oil and filter according to the appropriate schedule listed in scheduled maintenance information. Ford production and aftermarket (Motorcraft) oil filters are designed for added engine protection and long life. If a replacement oil filter is used - 2008 Mercury Sable | Owner's Manual - Page 291
flames, sparks or lighted substances to come near the battery. When working near the battery, always shield your brake. 2. Put the gearshift in P (Park), turn off all accessories and start the engine. 3. Run the engine until it reaches normal operating temperature. 291 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 292
If the level falls below, add coolant per the instructions in the Adding engine coolant section. Your vehicle was factory-filled with a 50/50 engine coolant and water concentration. If the concentration of coolant falls below 40% or above 292 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 293
and vehicle location. Adding engine coolant When adding coolant, make sure it is a 50/50 mixture of engine coolant and distilled water. Add the mixture to the coolant reservoir, when the engine is cool, until the appropriate fill level is obtained. 293 2008 Sable (mgo) Owners Guide (post-2002 - 2008 Mercury Sable | Owner's Manual - Page 294
to the coolant recovery reservoir when the engine is cool. Add the proper mixture of coolant and water to the "FULL COLD" level. For all other vehicles which have a coolant degas system with a pressurized cap, or if it is necessary to 294 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 295
and remove the cap. 5. Fill the engine coolant per month, have your authorized dealer check the engine cooling system. Your cooling system may have a leak. Operating an engine with a low level of coolant can result in engine overheating and possible engine damage. 295 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 296
corrosion protection characteristics of the engine coolant and may cause engine damage. • Decreased engine coolant concentrations below 40% will decrease the freeze protection characteristics of the engine coolant and may cause engine damage. 296 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA - 2008 Mercury Sable | Owner's Manual - Page 297
system or cause the fuel cap to disengage in a collision, which may result in serious personal injury. Automotive fuels can cause serious injury or death if misused or mishandled. Gasoline may contain benzene, which is a cancer-causing agent. 297 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA - 2008 Mercury Sable | Owner's Manual - Page 298
a physician immediately if you experience an adverse reaction. When refueling always shut the engine off and never allow sparks or open flames near the filler neck. Never smoke while if fuel is pumped into an ungrounded fuel container. 298 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 299
instructions on the pump island; Turn off your engine check fuel cap light or a "check fuel cap" message comes on, the fuel filler cap may not be properly installed. The light or message can come on after several driving events after you've refueled your vehicle. 299 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 300
-based additives. Studies indicate that these additives can cause your vehicle's emission control system to deteriorate more rapidly. Repairs to correct the effects of using a fuel for which your vehicle was not designed may not be covered by your warranty. 300 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 301
of the recommended octane rating. These products have not been approved for your engine and could cause damage to the fuel system. Repairs to correct the effects of using an aftermarket product in your fuel may not be covered by your warranty. Many of the world's automakers approved the World-Wide - 2008 Mercury Sable | Owner's Manual - Page 302
Service engine soon indicator may come on. For more information on the Service engine soon indicator, refer to Warning lights driving engine/ignition switch to the off position prior to refueling, an error in the reading will result if the engine is left running. 302 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 303
automatic driving (city or highway). This will change a number of variables and improve your fuel economy. Habits • Smooth, moderate operation can yield up to 10% savings in fuel. • Steady speeds without stopping will usually give the best fuel economy. 303 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 304
lb [180 kg] of weight carried). • Adding certain accessories to your vehicle (for example bug deflectors, rollbars/light bars, running boards, ski/luggage racks) may reduce fuel economy. • Using fuel blended with alcohol may lower fuel economy. 304 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA - 2008 Mercury Sable | Owner's Manual - Page 305
Ford, Motorcraft or Ford-authorized parts are used for maintenance replacements or for service of components affecting emission control, such non-Ford parts should be equivalent to genuine Ford Motor Company parts in performance and durability. 305 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA - 2008 Mercury Sable | Owner's Manual - Page 306
idle, or drive your vehicle in dry grass or other dry ground cover. The emission system heats up the engine compartment and exhaust system, which can start a fire. Illumination of the Service engine soon indicator, charging system warning light or the temperature warning light, fluid leaks, strange - 2008 Mercury Sable | Owner's Manual - Page 307
are apparent, indicator on can continued driving with the Service engine soon result in increased emissions, lower fuel economy, reduced engine and transmission smoothness, and lead to more costly repairs. Readiness for Inspection/Maintenance (I/M) testing Some state/provincial and local governments - 2008 Mercury Sable | Owner's Manual - Page 308
fluid in small amounts, continuously checking the level until it reaches the range between the MIN and MAX lines. Be sure to put the cap back on the reservoir. Refer to Maintenance product specifications and capacities in this chapter for the proper fluid type. 308 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 309
be compromised; seek service from your authorized dealer immediately. TRANSAXLE FLUID Checking automatic transaxle fluid Refer to your scheduled maintenance information for scheduled intervals for fluid checks and changes.Your transaxle does not consume fluid. However, the fluid level should be - 2008 Mercury Sable | Owner's Manual - Page 310
section in this chapter. Use of a non-approved automatic transmission fluid may cause internal transaxle component damage. If necessary, add fluid in 1/2 pint (250 mL) increments through the filler tube until the level is correct. 310 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 311
good sealing. 5. Install a new air filter element. Be careful not to crimp the filter element edges between the air filter housing and cover. This could cause filter damage and allow unfiltered air to enter the engine if not properly seated. 311 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA - 2008 Mercury Sable | Owner's Manual - Page 312
damage. The customer warranty may be void for any damage to the engine if the correct air filter element is not used. MOTORCRAFT PART NUMBERS Component 3.5L V6 Engine Engine air filter element FA-1884 Battery BXT-59 Oil filter FL-400-SB12 1 PCV valve 2 Spark plugs 1 The PCV valve is a critical - 2008 Mercury Sable | Owner's Manual - Page 313
transmission 10.0 quarts ATF2 fluid (9.5L)1 Motorcraft SAE 80W-90 Rear differential (AWD) 2.4 pints (1.15L) Premium Rear Axle fluid Lubricant Motorcraft SAE 75W-140 Power Transfer Unit 18 ounces (0.53L) Synthetic Rear Axle (PTU) fluid (AWD)5 Lubricant Lock cylinders - 2008 Sable (mgo) Owners Guide - 2008 Mercury Sable | Owner's Manual - Page 314
/ Ford Specification 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) Maintenance and Specifications Ford Part Name or equivalent Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil (US) Engine oil 5.5 quarts (5.2L) Motorcraft SAE 5W-20 Super Premium Motor Oil (Canada)3 Motorcraft - 2008 Mercury Sable | Owner's Manual - Page 315
Ford Part Number / Ford Specification Fuel tank - - 20.5 gallons (77.6L) AWD, PZEV AWD and PZEV FWD 20.0 gallons (75.7L) (FWD) 1 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) Approximate dry fill capacity. Actual amount may vary during fluid changes. Automatic transmissions that - 2008 Mercury Sable | Owner's Manual - Page 316
3.5L-DOHC V6 engine 3.5L 87 octane 1-4-2-5-3-6 (0.052-0.056 inch) 1.32-1.42 mm Coil on plug 10.3:1 • 3.5L V6 Engine 1. Short drivebelt is on first pulley groove closest to engine. 2. Long drivebelt is on second pulley groove farthest from engine. 316 2008 Sable (mgo) Owners Guide (post-2002-fmt - 2008 Mercury Sable | Owner's Manual - Page 317
door. Vehicle identification number (VIN) The vehicle identification number is located on the driver side instrument panel. Please note that in the graphic, XXXX is representative of your vehicle identification number. XXXXXXXXXXXXXXXXX 317 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 318
identifier 2. Brake system / Gross Vehicle Weight Rating (GVWR) / Restraint System 3. Vehicle line, series, body type 4. Engine type 5. Check digit 6. Model year 7. Assembly plant 8. Production sequence number TRANSMISSION/TRANSAXLE CODE DESIGNATIONS You can find a transmission/transaxle code on the - 2008 Mercury Sable | Owner's Manual - Page 319
or exceeds Mercury's rigorous engineering and safety specifications. Ford Motor Company will repair or replace any properly dealer-installed Genuine Mercury Accessories found to and management TripTunes™ Advanced portable audio connection 319 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 320
not locate the Amateur Radio Antennas in the area of the driver's side hood. • Electrical or electronic accessories or components that are added to the vehicle by the authorized dealer or the owner may adversely affect battery performance and durability. 320 2008 Sable (mgo) Owners Guide (post - 2008 Mercury Sable | Owner's Manual - Page 321
290 jumping a disabled battery ...261 maintenance-free ...290 replacement, specifications ...312 servicing ...290 Belt-Minder ...159 Booster seats ...178 Brakes ...226 anti-lock ...226 anti-lock brake system (ABS) warning light ...226 fluid, checking and adding ...309 fluid, refill capacities ...313 - 2008 Mercury Sable | Owner's Manual - Page 322
block heater ...224 Engine oil ...287 change oil soon warning, message center ...287 checking and adding ...287 dipstick ...287 filter, specifications ...289, 312 recommendations ...289 refill capacities ...313 specifications ...313 Event data recording ...6 2008 Sable (mgo) Owners Guide (post-2002 - 2008 Mercury Sable | Owner's Manual - Page 323
182 Inspection/maintenance (I/M) testing ...307 Instrument panel ...94 cleaning ...280 cluster ...10 lighting up panel and interior ...84 J Jack ...253 positioning ...253 storage ...253 Jump-starting your vehicle ...261 K Keyless entry system ...135 323 2008 Sable (mgo) Owners Guide (post-2002-fmt - 2008 Mercury Sable | Owner's Manual - Page 324
box (see Fuses) ...250 Power door locks ...123 Power mirrors ...99 Power point ...95 Power steering ...231 fluid, checking and adding ...308 fluid, refill capacity ...313 fluid, specifications ...313 Power Windows ...96 R Radio ...16, 20, 28 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA (fus) - 2008 Mercury Sable | Owner's Manual - Page 325
Emergencies ...253 Tires, Wheels and Loading ...205 Tires ...190-191, 253 alignment ...198 care ...194 changing ...253, 256 checking the pressure ...194 inflating ...192 label ...204 replacing ...196 rotating ...198 safety practices ...197 325 2008 Sable (mgo) Owners Guide (post-2002-fmt) USA - 2008 Mercury Sable | Owner's Manual - Page 326
vehicle ...224 W Warning lights (see Lights) ...10 Washer fluid ...286 Water, Driving through ...243 Windows power ...96 Windshield washer fluid and wipers ...92 checking and adding fluid ...286 replacing wiper blades ...287 Wrecker towing ...266 326 2008 Sable (mgo) Owners Guide (post-2002-fmt - 2008 Mercury Sable | Owner's Manual - Page 327
327 - 2008 Mercury Sable | Owner's Manual - Page 328
328
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
187
-
188
-
189
-
190
-
191
-
192
-
193
-
194
-
195
-
196
-
197
-
198
-
199
-
200
-
201
-
202
-
203
-
204
-
205
-
206
-
207
-
208
-
209
-
210
-
211
-
212
-
213
-
214
-
215
-
216
-
217
-
218
-
219
-
220
-
221
-
222
-
223
-
224
-
225
-
226
-
227
-
228
-
229
-
230
-
231
-
232
-
233
-
234
-
235
-
236
-
237
-
238
-
239
-
240
-
241
-
242
-
243
-
244
-
245
-
246
-
247
-
248
-
249
-
250
-
251
-
252
-
253
-
254
-
255
-
256
-
257
-
258
-
259
-
260
-
261
-
262
-
263
-
264
-
265
-
266
-
267
-
268
-
269
-
270
-
271
-
272
-
273
-
274
-
275
-
276
-
277
-
278
-
279
-
280
-
281
-
282
-
283
-
284
-
285
-
286
-
287
-
288
-
289
-
290
-
291
-
292
-
293
-
294
-
295
-
296
-
297
-
298
-
299
-
300
-
301
-
302
-
303
-
304
-
305
-
306
-
307
-
308
-
309
-
310
-
311
-
312
-
313
-
314
-
315
-
316
-
317
-
318
-
319
-
320
-
321
-
322
-
323
-
324
-
325
-
326
-
327
-
328
 |
 |
Introduction
4
Instrument Cluster
10
Warning lights and chimes
10
Gauges
14
Entertainment Systems
16
How to get going
16
AM/FM stereo with CD
20
AM/FM stereo with in-dash six CD
28
Auxiliary input jack (Line in)
36
USB port
38
Satellite radio information
41
Family entertainment system
44
Navigation system
73
SYNC
73
Climate Controls
74
Manual heating and air conditioning
74
Automatic temperature control
76
Rear window defroster
81
Lights
82
Headlamps
82
Turn signal control
86
Bulb replacement
87
Driver Controls
92
Windshield wiper/washer control
92
Steering wheel adjustment
93
Power windows
96
Mirrors
98
Speed control
101
Moon roof
106
Message center
111
Table of Contents
1
2008 Sable
(mgo)
Owners Guide (post-2002-fmt)
USA
(fus)