2000 Nissan Xterra Owner's Manual - Page 38
2000 Nissan Xterra Manual
Page 38 highlights
After the child restraint is removed and the seat belt is fully retracted, the automatic locking mode (child restraint mode) is canceled. onto the appropriate anchor bracket. Make sure the shoulder belt is placed between the seat back and child restraint. To install the anchor bracket, a metric bolt of the dimensions listed below must be used. Bolt diameter: 8.0 mm Bolt length: at least 1.18 in (30 mm) Thread pitch: 1.25 mm Secure the top strap to the attaching bolt which provides the straightest installation of the strap. ARS1236 TOP STRAP CHILD RESTRAINT If your child restraint has a top strap, install the anchor bracket to a provided anchor point. Anchor bracket hardware must be installed. The top strap anchor bracket hardware is available through an authorized NISSAN dealer. Part # 88894-89900* *: Always check with the Parts Department at an authorized NISSAN dealer for the latest parts information. Secure the child restraint with the threepoint seat belt and latch the top strap hook WARNING Child restraint anchor points are designed to withstand only those loads imposed by correctly fitted child restraints. Under no circumstances is it to be used for adult seat belts or harnesses. Seats, restraints and supplemental air bag systems 1-31