2010 Nissan Sentra Owner's Manual - Page 40

Attaching the rear center seat belt Always be sure the center seat belt connector tongue and connector buckle are attached. Disconnect only when folding down the rear seat. To connect the buckle: 1 WARNING ● Do not unfasten the rear center seat belt connector except when folding down the rear seat. ● When attaching the rear center seat belt connector, be certain that the seatbacks are completely secured in the latched position and the rear center seat belt connector is completely secured. ● If the rear center seat belt connector and the seatbacks are not secured in the correct position, serious personal injury may result in an accident or sudden stop. Pull out the connector buckle from the fabric sleeve. Pull out the connector tongue. Pull the seat belt and secure the receiver buckle until it clicks. 2 3 The center seat belt connector tongue and receiver buckle are indicated by the > and < marks. The center seat belt connector tongue can be attached only into the rear center seat belt connector buckle. To fasten the seat belt, see "Fastening the seat belts" earlier in this section. LRS0242 Shoulder belt height adjustment (front seats) The shoulder belt anchor height should be adjusted to the position best for you. See "Precautions on seat belt usage" earlier in this section. To adjust, pull out the adjustment button 1 and move the shoulder belt anchor to the desired position 2 , so the belt passes over the center of the shoulder. The belt should be away from your face and neck, but not falling off your shoulder. Release the adjustment button to lock the shoulder belt anchor into position. Safety-Seats, seat belts and supplemental restraint system 1-21