1994 Oldsmobile 88 Owner's Manual - Page 70

Features di Controli Remember that damaged wiper blades may prevent you from seeing well enough to drive safely. To avoid damage, be sure to clear ice andsnow from the wiper blades before using them. If they're frozen to the windshield, carefully loosen or thaw them. If your blades do become damaged, get new blades or bladeinserts. Heavy snow or ice can overloadyour wipers. A circuit breaker will stop them I until the motor cools. Clear awaysnow At the topof the turn signal/multior ice to prevent an overload. function lever there's a paddle with the word PUSH on it. To spray washer fluid on the windshield, push the paddle for less than onesecond. The wipers will clear the window and then either stop or return to your preset speed.For more washer cycles, pushand hold the paddle. If the fluid level in the windshield washer is low, vehicles with the Standard Cluster have a LOW WASH FLUID light that will come on. On vehicles with the Electronic Cluster, if the fluid level in the windshield washer bottle is low, the message LOW WASHER FLUID will appear in the information center. See the Index under Low Washer Fluid Warning. For steady wiping at low speed, turn thc band away from you to theLO position. For high speed wiping,turn theband further, toHI. To stop thewipers, move the band to OFF. You can set the wiper speed for long or a short delay between wipes. This can be very useful in light rain orsnow. Turn the band to choose the delay time.The closer to LO, the shorter the delay. Windshield W s e ahr 68