1999 Oldsmobile Intrigue Owner's Manual - Page 262

1999 Oldsmobile Intrigue Manual

Page 262 highlights

To check the aim, the vehicle should be properly prepared as follows: 0 0 Place thevehicle on a levelpad or surface. The vehicle should not have any snow, ice ormu(1 attached to it. The vehicle should be fullyassembled and all other work stopped while headlamp aiming is being done. There should not be any cargo or loading of the vehicle, except it should have afull tank of gas and one person or 160 lbs. (75 kg) on the driver's seat. Close all doors. Tires should be properly inflated. Rock the vehicle to stabilize the suspension. For the vertical adjustment, state inspection stations will generdy d h w areading of plus 0.76 degreesor minus 0.76 degrees from the center of the bubble. It is recommended that the upper limit not exceed plus 0.4 degrees from the center of the bubble. Other drivers may flash their high beams at you if your adjustment is much above plus 0.4 degrees. 0 0 0 0 0 Dl .4" .2" NOTICE: To make sure your headlamps are aimed properly, read all the instructions before beginning. Failure to follow these instructions could cause damage to headlamp parts. 6-34

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300
  • 301
  • 302
  • 303
  • 304
  • 305
  • 306
  • 307
  • 308
  • 309
  • 310
  • 311
  • 312
  • 313
  • 314
  • 315
  • 316
  • 317
  • 318
  • 319
  • 320
  • 321
  • 322
  • 323
  • 324
  • 325
  • 326
  • 327
  • 328
  • 329
  • 330
  • 331
  • 332
  • 333
  • 334
  • 335
  • 336
  • 337
  • 338
  • 339
  • 340

To check the
aim,
the
vehicle should be properly
prepared as follows:
For
the
vertical
adjustment,
state
inspection
stations
will
generdy
d h w
areading
of
plus
0.76
degrees
or
minus
0.76
degrees from
the
center
of
the
bubble.
0
0
Place
the vehicle on a
level pad or surface.
The vehicle should not have any
snow, ice
or mu(
attached to it.
0
0
0
0
0
1
The vehicle should be
fully assembled and all other
work stopped while headlamp aiming is being done.
There should not
be any cargo or loading of the
vehicle, except it should have
a
full
tank
of
gas and
one person
or
160
lbs.
(75
kg)
on the
driver's seat.
Close
all
doors.
Tires should be properly inflated.
Rock the vehicle to
stabilize
the
suspension.
NOTICE:
To
make
sure
your
headlamps
are
aimed
properly,
read
all
the
instructions
before
beginning.
Failure
to
follow
these
instructions
could
cause
damage
to
headlamp
parts.
Dl
.2"
.4"
It
is
recommended that the
upper limit not exceed
plus
0.4
degrees from
the
center of the bubble.
Other drivers may flash
their high beams at you
if
your adjustment
is
much
above plus
0.4
degrees.
6-34