1999 Oldsmobile Intrigue Owner's Manual - Page 72

2. Gently pry the battery out of the transmitter. 3. Put the new battery into the transmitter as shown on the transmitter (use a type CR2032 battery). 4. Put the two halves back together. Make sure the halves are together tightly so water won't get in. 5 . Resynchronize and then test the transmitter. Resynchronizing Your Remote Keyless Entry Transmitter After you have changed the battery in your keyless entry transmitter, you will need to resynchronize the transmitter. To do this, press the LOCK and UNLOCK buttons together and hold for approximately seven seconds (or until the horn chirps threetimes). You will need to use this procedure if your vehicle has lost battery power for an extended period of time. To replace your battery: 1. Insert a flatobject like a dime into the slot on the back of the transmitter. Gently pry apart the front and back.