1999 Oldsmobile Intrigue Owner's Manual - Page 92

To signal a lane change, just raise orlower the lever until the arrow starts to flash. Hold it there until you complete your lane change. The leverwill return by itself when you release it. As you signal a turn or lanechange, if the arrow flashes faster than normal, a signal bulb may be burned out and other drivers won't see your turn signal. If a bulb is burned out, replace itto help avoid an accident. If the arrowsdon't go on at all when you signal a turn, check for burned-out bulbs and then check the fuse (see"Fuses and Circuit Breakers" in the Index). A chime will sound if you leave your turn signal on for more than 3/4 mile (1.2 km). Headlamp High/Low Beam Changer To change your headlamps from low beam to high beam, push the lever forward. To change back to low beam, pull the lever toward you. To flash your high beams, pull the lever toward you and release. The lever will return to the low-beam position. Flash-to-Pass With the lever in the low-beam position, pull the lever toward you momentarily to switch to highbeams (to signal you are going to pass). If you have the headlamps on, they will return to low beams when you release the lever. 2-32