2003 Oldsmobile Alero Owner's Manual - Page 265

2003 Oldsmobile Alero Manual

Page 265 highlights

Front Turn Signal and Parking Lamps 1. Remove the headlamp assembly. Refer to the removal procedure earlier in this section. 2. Turn the bulb assembly retainer and pull out the bulb. 3. Unclip the bulb assembly from the wiring harness. 4. When replacing the bulb, be sure to properly align the bulb with the locating feature in the assembly. 5. Reverse Steps 1 through 3 to reinstall the bulb assembly. Taillamps, Turn Signal, and Stoplamps Center High-Mounted Stoplamp (CHMSL) 1. Open the trunk lid and locate the center high-mounted stop lamp on the inside of the lid. 2. Use a tool to remove the three screws. I A. 6. C. D. E. / - Taillamp TaiVBrake Lamp Taillamp Turn Signal Back-up Lamp 3. Gently remove and replace the bulb(s). 4. Reverse this procedure to reassemble the lamp. 5-50

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300
  • 301
  • 302
  • 303
  • 304
  • 305
  • 306
  • 307
  • 308
  • 309
  • 310
  • 311
  • 312
  • 313
  • 314
  • 315
  • 316
  • 317
  • 318
  • 319
  • 320
  • 321
  • 322
  • 323
  • 324
  • 325
  • 326
  • 327
  • 328
  • 329
  • 330
  • 331
  • 332
  • 333
  • 334
  • 335
  • 336
  • 337
  • 338
  • 339
  • 340
  • 341
  • 342
  • 343
  • 344
  • 345
  • 346
  • 347
  • 348
  • 349
  • 350
  • 351
  • 352
  • 353
  • 354

Front Turn
Signal and
Parking Lamps
1.
Remove the headlamp assembly. Refer to the
removal procedure earlier in this section.
2.
Turn the bulb assembly retainer and pull out
the bulb.
3.
Unclip the bulb assembly
from the wiring harness.
4.
When replacing the bulb, be sure to properly
align the bulb with the locating feature in the
assembly.
5.
Reverse Steps
1
through
3
to reinstall the bulb
assembly.
Center
High-Mounted
Stoplamp (CHMSL)
1.
Open the
trunk lid and locate the center
high-mounted stop
lamp on the inside
of
the lid.
2.
Use a tool to remove the three screws.
3.
Gently remove and replace the bulb(s).
4.
Reverse this procedure to reassemble the lamp.
Taillamps,
Turn
Signal,
and
Stoplamps
I
/---
A.
Taillamp
6.
TaiVBrake Lamp
C.
Taillamp
D.
Turn Signal
E.
Back-up Lamp
5-50