1999 Pontiac Montana Owner's Manual - Page 16
1999 Pontiac Montana Manual
Page 16 highlights
yellowblue Removing the Split Bench Seat Make sure the seatback is in the upright position and that the safety belts are on the correct section of the seat. The head restraints should be fully down. 1. For the second row split bench, with the seatback in the upright position, unhook the side attachment for the safety belt. This mini-buckle is located on the right side of the seat. 2. Push the red center of the buckle up with a small pointed object -- like a key or a pen to remove the seat belt, if needed. 5. From behind the bench seat, pull the nylon strap at the base of the seat to release the rear latches from the floor pins. Do not let go of the straps until the seat is folded all the way forward. 3. Lift the seatback recliner lever or pull the nylon strap on the back of the seat to fold the seatback forward. 4. Slide the seat all the way back by lifting either one of the adjustment bars and sliding the seat fully rearward. 1-10