1999 Pontiac Montana Owner's Manual - Page 294

yellowblue A. Jack B. Strap C. Bracket D. Wing Nut E. Jacking Instructions F. Bag and Tools A. Hoist Shaft B. Hoist Assembly C. Retainer D. Spare Tire E. Extension (Chisel End) F. Wrench Remove the jack and jacking tools by loosening the wing nut and bracket. Separate the plastic pouch from the jack and remove the jacking tools (folding wrench and extension) from the pouch. The compact spare tire is located under the vehicle, ahead of the rear bumper. (See "Compact Spare Tire" later in this section for more information about the compact spare.) Attach the wrench to the extension and insert the chisel end on an angle through the hole in the rear bumper and into the hoist shaft. Then, turn the folding wrench counterclockwise to lower the spare tire to the ground. Continue to turn the wrench so the spare tire can be pulled out from under the vehicle. 5-22