1999 Pontiac Montana Owner's Manual - Page 340

yellowblue Front Turn Signal/Parking Lamps 1. Open the hood. 9. Align the pins on the bottom of the headlamp assembly with the holes in the lamp support bracket while placing the holes in the assembly over the bolts where the wing nuts attach. 10. Replace and tighten the wing nuts. 11. Replace the parking/turn signal lamp assembly by lining up the tabs at the back of the assembly with the holes in the fender. 12. Tighten the bolt connecting the parking/turn signal lamp assembly. Be sure the tab from the parking/turn signal lamp assembly is inboard of the tab from the headlamp assembly. 2. Remove the thumb screw attaching the parking/turn signal lamp assembly to the headlamp assembly. 3. Pull the parking/turn signal lamp assembly away from the vehicle. 4. Unscrew the bulb socket from the lamp assembly by pressing the tab while turning counterclockwise. 6-34