2000 Pontiac Montana Owner's Manual - Page 30

Replacing the Bucket Seats Don't put the seats in so they face rearward because they won't latch that way. If you want more storage room behind the seat, adjust the seat by sliding it forward. The bucket seats have seat position labels, located on the back of the seat, showing where the seat must go. Follow that diagram. See "Seat Controls" in the beginning of this section for more details. The seat must be placed in the proper location for the legs to attach correctly. RIGHT ONLY seats that don't have the built-in child restraint option fit only in the right location of either row, the E and F or I and J sets of floor cups. The CENTER OR LEFT seat fits in the center location or in either left location, the A and B, C and D or G and H sets of floor cups. RIGHT ONLY seats that have the built-in child restraint option fit only in the right location of the second row, the E and F sets of floor cups. Make sure the seat is in the full rear position before beginning this procedure. 1. With the seat folded, squeeze the angled bar toward the solid crossbar while placing the front hooks of the bucket seat onto the front two floor pins. 2. Make sure the bucket seat is angled so that the front hooks clear the floor pins. If the front legs are not attached correctly, the rear legs will not attach to the rear set of floor pins. 1-18