2001 Pontiac Aztek Owner's Manual - Page 149

Removing the Sliding Rear Convenience/Cargo Tray 1. Make sure that all items have been removed from the top and the inside of the sliding rear convenience/cargo tray. 2. Push down on the release lever located in front of the handle of the tray to release the pin from the assembly track. Roll the tray out of the vehicle approximately six inches (15.24 cm). 3. Use the handle to lift up on the tray while pulling it towards you. Use your other hand to support and lift the tray from the bottom. Remove the tray from the vehicle at about a 45 degree angle. The rear of the tray has rollers for moving it, in an upright position, to and from the vehicle without having to carry it. Removing the Floor Track Assembly After the tray is removed, the floor track assembly also needs to be removed. Items should not be put onto the floor track assembly. 1. Unlock the slide locks from the two rear floor retainers. The left lock slides to the right and the right lock slides to the left. 2. Disengage the front forks from the retainers by lifting up and pulling the assembly toward you. 2-65