2001 Pontiac Aztek Owner's Manual - Page 150

Replacing the Floor Track Assembly Before beginning this procedure make sure that nothing is in the rear of the vehicle. Double check to ensure that the slide locks are engaged under the retainers and locked into place. 3. Pull up on the floor track assembly to make sure it is locked into place. Replacing the Sliding Rear Convenience/Cargo Tray The floor track assembly must be installed first for the sliding rear convenience/cargo tray to stay locked into place. See "Replacing the Floor Track Assembly" previously for more information. 1. Pick up the tray by the handle and support the tray from the bottom with your other hand. There are four (4) axles on the bottom of the tray (two in front and two in back). 2. Place the tray onto the floor track assembly. Make sure that the two front axles are placed over the hooks on the rear of the floor track assembly. Make sure the rollers on the bottom of the tray are located in the tracks of the floor track assembly. 3. Roll the tray forward into the vehicle until you hear a click. 1. Slide the floor track assembly in while aligning the front forks, located on the bottom front of the track assembly, so that the forks slide under the two front floor retainers. 2. Insert the slide locks into the two rear floor retainers. You may have to apply downward pressure to the floor track assembly to engage the slide locks under the floor retainers. 2-66