2002 Pontiac Aztek Owner's Manual - Page 148

To remove the sunroof stop, do the following: 1. Remove the tool located in the bag in the glovebox labeled "tool kit-acsry." 2. Place the tool on the screw located in the side rail assembly in front of the front crossrail. 3. Remove the screw. 4. Repeat for the other side. 5. Put the tool and the screws back in the plastic bag in the glove box. Lift the release levers on each side to unlock the crossrails. Slide the crossrails forward or backward, as needed, to accommodate loads of various sizes. After repositioning the crossrails, engage the release lever. This will lock the crossrails in place. Use the four tie-down loops in each of the side rails to help secure large loads. To replace the sunroof stop, do the following: 1. Put the crossrails in the full rear position. 2. Put the screws back into each side rail assembly. Make sure the screws are in the first hole in front of the crossrail. NOTICE: Do not open the sunroof if the crossrails are not in the full rear position. This could cause damage to the sunroof glass panel and/or the crossrails. 2-71