2002 Pontiac Aztek Owner's Manual - Page 194

The HUD controls are located to the right of the instrument panel cluster. To adjust the HUD so you can see it properly: 1. Start your engine and turn the dimmer knob to the desired HUD image brightness. The brightness of the HUD image is determined by the ambient light conditions in the direction your vehicle is facing and where you have the HUD dimmer knob set. If you are facing a dark object or a heavily shaded area, your HUD may anticipate that you are entering a dark area and may begin to dim. 2. Adjust the driver's seat. If you change your seat position later, you may have to readjust your HUD. When the HUD is on, the speedometer reading will be displayed continually. The current radio station, cassette tape or CD number and track number will only be displayed for three seconds after the radio, tape or CD track status changes. This will happen whenever one of the radio controls is pressed, either on the radio or on the optional steering wheel controls. 3. Press the UP or DN buttons until the HUD image is easy to see and then press the DN button until the HUD image is as low as possible, but, remains in full view straight ahead near the front bumper. The HUD image can only be adjusted up and down, not side-to-side. 4. To turn the image off, turn the dimmer knob counterclockwise to OFF. 2-117