2005 Pontiac Aztek Owner's Manual - Page 175
2005 Pontiac Aztek Manual
Page 175 highlights
Your vehicle was originally programmed to the 30 second mode. The mode may have been changed since then. To determine the current mode, or to change the mode, do the following: 1. Follow the instructions for "Entering Programming Mode" listed previously. 2. Press the MODE button until HEADLMP EXIT DELAY appears in the DIC. 3. Press the SET button until the arrow is before the mode you prefer. The mode you selected is now set. You can either exit programming mode by following the instructions later in this section or program the next feature available on your vehicle. Interior lighting delay will not occur while the ignition is in ON. After 25 seconds, the interior lamps will fade out. The lamps will fade out before the 25 seconds if one of the following occurs: • The ignition is turned to ON. • All doors are locked using the remote keyless entry transmitter. • The interior lamp override is turned on. • There is no occupant activity detected for an illumination period of 25 seconds. Your vehicle was originally programmed to ON. The mode may have been changed since then. To determine the current mode, or to change the mode, do the following: 1. Follow the instructions for "Entering Programming Mode" listed previously. 2. Press the MODE button until INTERIOR LIGHTING DELAY appears on the DIC. 3. Press the SET button until the arrow is before ON or OFF. The mode you selected is now set. You can either exit programming mode by following the instructions later in this section or program the next feature available on your vehicle. Interior Lighting Delay The interior lighting delay feature can be programmed to one of the following modes: OFF: This feature will not illuminate the interior of your vehicle when all of the doors are closed. ON: This feature will continue to illuminate the interior lamps for 25 seconds after all doors have been closed so that you can find your ignition and buckle your safety belt at night. 3-53