2005 Pontiac Aztek Owner's Manual - Page 180

The mode you selected is now set. You can either exit programming mode by following the instructions later in this section or program the next feature available on your vehicle. The mode you selected is now set. You can now exit programming mode by following the instructions next in this section. Lock Feedback The lock feedback feature can be programmed to one of the following modes: OFF: When LOCK is pressed on the remote keyless entry transmitter, the headlamps and parking lamps will not flash and the horn will not sound. LIGHTS: When LOCK is pressed on the remote keyless entry transmitter, the headlamps and parking lamps will flash briefly. HORN: When LOCK is pressed on the remote keyless entry transmitter, the headlamps and parking lamps will flash briefly and the horn will sound. Your vehicle was originally programmed to HORN. The mode may have been changed since then. To determine the current mode, or to change the mode, do the following: 1. Follow the instructions for "Entering Programming Mode" listed previously. 2. Press the MODE button until LOCK FEEDBACK appears on the DIC. 3. Press the SET button until the arrow is before OFF, LIGHTS, or HORN. 3-58 Exiting Programming Mode To exit programming mode, do one of the following: • Shift out of PARK (P). • Turn the ignition key out of ON. • Do not program any commands for one minute while in the programming mode. The programming mode message will turn off to let you know that you are no longer in the programming mode. Once you have reached the end of the personalization features, PERSONALIZATION SELECTION IS DONE will appear briefly. Then PRESS SET TO EXIT MODE TO CONTINUE will appear. Pressing SET will exit you out of the DIC. Pressing MODE will take you to the beginning of personalization.