2008 Pontiac G6 Owner's Manual - Page 156
2008 Pontiac G6 Manual
Page 156 highlights
To avoid blowing cold air at start-up in cold weather, the system delays turning on the fan until warm air is available. The length of delay depends on the engine coolant temperature. Turning the fan knob overrides this delay and change the fan to a selected speed. If your vehicle has the remote start feature, the climate control display initially shows "AS" in place of the temperature to indicate the remote start has been activated. The remote start system turns on using the last temperature selected before the vehicle was last turned off. For best performance, turn the fan and mode knobs to the AUTO position. The fan speed and air delivery modes will change to achieve the best comfort. If the outside air temperature is below 45°F and the air delivery mode knob is set to AUTO, the automatic climate control system starts in the defrost mode to clear the window. The automatic climate control changes back to manual operation by turning the vehicle on with the key. This direction can be changed by changing the mode position. The temperature can also be adjusted using either the up or down arrow temperature buttons. 9 (Fan): H Turn the knob with the fan symbol to manually adjust the fan speed. (Vent): Turn the knob to this position to direct air to the instrument panel outlets. ) (Bi-Level): 6 (Floor): Turn the knob to this position to direct half of the air to the instrument panel outlets, and the remaining air to the floor outlets. Turn the knob to this position to direct most of the air to the floor outlets with some air directed to the side window outlets and windshield. The right knob can also be used to select defog or defrost modes. See Defogging and Defrosting later in this section. Manual Operation The air delivery mode or fan speed can be manually adjusted. 9 (Off): Select this position on the fan knob to turn off the entire climate control system. Outside air still enters the vehicle, and is directed to the floor. 3-24 : (Outside Air): Press the right side of this button to turn the outside air mode on. Air from outside the vehicle circulates throughout your vehicle. An indicator light comes on to show that it is activated. The outside air mode can be used with all modes, but it cannot be used with the recirculation mode. Press this button to cancel the recirculation mode.