2008 Pontiac G6 Owner's Manual - Page 289
2008 Pontiac G6 Manual
Page 289 highlights
To replace one of these bulbs: 1. Remove the two screws that secure the headlamp assembly. 3. Pull back the front fascia then pull the headlamp assembly forward, out of the vehicle. You need to pry the headlamp assembly away from the fender. This frees the ball stud from its retainer in the fender bracket. You might want someone to assist you with the removal of the headlamp assembly to avoid possible damage to the vehicle. 4. Remove the bulb access cover by turning it counterclockwise. 5. Turn the bulb socket counterclockwise and pull out the bulb assembly. 6. Disconnect the bulb socket from the wiring harness for headlamps. For the front turn signal/parking or sidemarker bulbs, unclip the bulb from the socket. 7. Install a new bulb. 2. Loosen the front fascia by removing the plastic push pins along the top of the tie bar by prying under the fasteners with a tool. 8. Reverse Steps 1 through 4 to reinstall the bulb assembly and headlamp assembly. 5-53