1995 Pontiac Grand Prix Owner's Manual - Page 246

6. Remove the Torx@ screws atthe end of the aiming ring. The aiming ring will swing open like a gate. 6 7. Remove the aiming ring. Place it face down on the work surface with the aim indicator up. 4. Lift the plastic locking tabs on the electrical connector and pullthe connector from the headlamp socket. Note which way the socket is pointing before you disconnect it. You'll need to install the new headlamp so the socket points in the same direction. 5. Set the headlamp assembly on a work surface with the lens facing you. 8. Check that the number on the new headlamp matches the number on theheadlamp being replaced. The letter on headlamp (U or L) must also match. the 9. Put the new headlamp in position. Make sure the socket points in the same direction as it did with the oldheadlamp. 6-33