1995 Pontiac Grand Prix Owner's Manual - Page 252

Turn the socket counterclockwise 1/6-tum until itfeels loose. Front Turn Signal (4-Door Models) I ) 1. Remove the screws and pull the turn signal housing forward. 2. Turn the bulb socket counterclockwise until it pops loose fromthe housing. 3. Pull out~the socket. 4. Pull the bulb out of the socket. 3. Pull out the bulb socket. 4. Lift the plastic locking tab on the electrical connector and pull theconnector from the bulb socket. 5. Snap the electrical connector into a new bulb socket. 6. Replace the bulb socket into the housing and turn clockxvise. 7. Replace the housing to the vehicle. 5. Push in a new bulb. 6. Replace the socket into thehousing and turn clockwise until it snaps in place. 7. Replace the cover and pins. 8. Install the screws. 6-39